Hi,
So i started today with a raspberry pi 4 1gb version.
I installed the img on the SD card put it in the pi and nothing happens.
I plugged in a monitor but nothing even after 1 hour there is nothing happening.
What m i doing wrong.
Thnx for the help.
Kind regards
Wivalo
How did you install? Copy the file to SD card or write with etcher?
Verstuurd vanaf mijn ONEPLUS A6013 met Tapatalk
HI,
thanks for the fast reply.
I followed the steps on the website.
"
Once download has finished, you’ll have a zip file
Extract the downloaded zip file and you’ll have a .img image file
Download and install Etcher, which will write Volumio to your SD Card
Open etcher, and click on “Select Image”. Now select the Volumio .img file
Insert the MicroSD Card on your computer, you could use an external card reader or the SD slot if your computer has one.
Click on Select drive, and select the SD Card \ SD Card reader.
To be safe, unplug every External USB Drive you may have connected to your PC and make sure that the device name correspond to the microSD card
Click “Continue” and when ready, hit “Flash”
When the operation has finished (it may take up to 10 minutes)close Etcher and eject the SD card
Done! Volumio is now on your SD Card
"
Also tried wind32diskimager.
Kind regards
Wivalo
And you dont see an ssid wireless named volumio?
Verstuurd vanaf mijn ONEPLUS A6013 met Tapatalk
Hi,
Nothing at all.
Even the ethernet port isn’t showing any activity.
Kind regards
Wivalo
Fixed by searching older version and updating to new version
No clue why the new version won’t install.
thanks for the help
Kind regards
Wivalo
It’s solved, that is the important thing. And you did it yourself.[emoji1320]
Verstuurd vanaf mijn ONEPLUS A6013 met Tapatalk