Volumio 2 and brutefir

luisleonardo.pt · December 5, 2016, 6:45pm

I will only be able to try it tomorrow. I have friends at home and if I stop Volumio right now I’ll be dead

balbuze · December 5, 2016, 7:09pm

@jppmedia
Salut !
You’ll understand I will answers in english… When you say “plantage” what do you mean ? It stop to work ? If you come back to previous settings it should re-work. If there a problem, please give more details. I need it to improve the plugin.
merci

@ luisleonardo.pt
Don’t take any risk for that !

luisleonardo.pt · December 6, 2016, 6:20pm

Fresh install. Same issue:

Downloading plugin at http://127.0.0.1:3000/plugin-serve/brutefir.zip END DOWNLOAD: http://127.0.0.1:3000/plugin-serve/brutefir.zip Creating folder on disk Unpacking plugin Checking for duplicate plugin Copying Plugin into location Installing dependencies The following error occurred when installing the plugin: Error

Can you give me the list of dependencies so I can install manually?

balbuze · December 6, 2016, 6:39pm

Hi just downloaded the file from my github repo and installed it… No problem. So I don’t know what happen with you…
What is your device ? (rpi2, rpi3)
Stupid question is your device connected to Internet ?
Have you done some “manual” modifications on Volumio ?
If you want to see the dependencies, have a look in install.sh
let me know

audiofilodigital · December 6, 2016, 7:56pm

Hello!
Now just here. By the way, I said I got an RPI-2 but NO, it is still an RPI-1 model B with an USB dac (Generic I2S) + VOLUMIO-2 + WiFi dongle.
I’m currently getting exactly same “problems” as you have mentioned here before:

“Loopback” cannot be saved (it always goes back to “Generic I2S”) …
Volume control gets a bit crazy (very loooooong delay)
Now in “Playback Options”/Mix type, I can only select “Soft” (or “None”) as “Hardware” is not showed anymore…

All of these until I select previous configuration,

in PLAYBACK OPTIONS (Volumio2 menu), I select back again, USB:Device, and then,
in “Playback Options”/Mix type “Hardware” option is available again. And Volume control, with a small delay, works fine again.
So, nothing new from my side

What I can see in the DSP Plugin “settings” (Volumio DSP Center) seems very promising…

balbuze · December 6, 2016, 8:04pm

With RPI B, brutefir hangs every second and I don’t know why. If launched “by hand” is seems ok but when launched by systemd : hang…
If you made the mod of the file as explain before, you can choose loopback as output. Of course you have to let i2s dac activated to be able to select it in the plugin advanced settings. And in that case, mixer choice is only “none” or “software”. It is a normal behavior. Volumio does not allow (yet) to use mixer of other output than the one selected.

luisleonardo.pt · December 7, 2016, 9:42am

My setup:

Volumio 2.031
Raspberry Pi 3 Model B.
Using Wi-fi and I have Internet access.
Polyvection’s PlainAMP (works with “IQaudIO DAC Plus” option).

I manually copied all the files and run the install.sh script.
I edited the index.js to allow I2S and loopback at the same time on Playback Options.
The plugin is now marked as active but I’m not getting any sound.

I have the following config on Playback Options:
Output Device: Loopback
I2S DAC: On
Dac Model: IQaudIO DAC Plus

In Brutefir Advanced Settings I tried all options.
Also, when I go back to Advanced Settings the name is changed to 0, 1 or 2.

Thank you for your help

balbuze · December 7, 2016, 8:08pm

@luisleonardo.pt
What do you mean by “I manually copied all the files and run the install.sh script.” ?
You just need brutefir.zip and then install it via plugin page in Volumio.
In playback, select Loopback as output and save
Select the mixer “none” or “software” and save. Sometime it required several save and/or change before it works…
In the plugin advanced page, just select iqaudio as output. Once saved, it may appears as a number “2”. It’s a small bug but not really important as it just the alsa device number of the selected output, and it just works like that.
For input of the plugin, just let Loopback,1 (the default value)
For left and right filter leave empty ( to start)
Save advanced setting, you should have a message about 5 secondes later.
Now play something.
If still no sound, you can check if brutefir is working. “systemctl status brutefir”
If it is not working, you can try ‘brutefir /data/configuration/miscellanea/brutefir/volumio-brutefir-config’ and paste the result…
let me know

luisleonardo.pt · January 3, 2017, 10:51pm

Sorry for the late reply but I’ve been very busy.

As soon as I got some spare time and the Jukebox is off I’ll change SD cards and try again.

keylimesoda · January 21, 2017, 6:48pm

As I understand it, BruteFIR (like any convolver) requires a different configuration for each sampling rate input (e.g. 44k, 96k, 192k etc)?

If that’s the case, does it make sense to put sox somewhere in the plugin signal path to ensure resampling to the correct sampling rate before handing to BruteFIR?

Klaus · January 22, 2017, 12:56pm

This error appears if you replaced the standard-password “volumio”. Reset to “volumio” with:

sudo passwd volumio

(a single “passwd” won’t work because security-limits)

btw: Nice work balbuze

Regards

Klaus

jonas18z · May 23, 2017, 8:56pm

Tryed brutefir2 from today 23 may and it reseted my volumio after enabling the plugin and now I can’t access the web interface and logged in to SSH and run uninstall.sh from the plugin folder but no help.

How can I remove the plugin or reset volumio from SSH?

balbuze · May 24, 2017, 5:50am

Sorry for that… You can remove the folder rm -Rf data/plugin/miscellaneous/brutefir. But what is your device and DAC and version of volumio ? In fact it hangs because brutefir can’t start. I have to handle this error in the plugin.

balbuze · May 24, 2017, 8:01pm

I uploaded a new version that should solved the problem of the UI when brutefir is misconfigured ( first start, or wrong settings).
Equalizer is operational !!!
I only checked the plugin with a usb dac, with no volume control…
WIP

jonas18z · May 25, 2017, 3:13pm

Removed but same problem. Vill reinstall volumio later

I hade the lastest official version (that you get via web update) I can’t check the number because can’t access the web interface.

and IQaudio DAC+

balbuze · May 25, 2017, 4:57pm

Was your system working before brutefir plugin install ? I tested with a rpi2 and a fresh install of volumio with the last version of plugin and it is fine…
github.com/balbuze/volumio-plug … utefir.zip
But as it is, it not esay to test with a i2s dac… I’m working on that point.

jonas18z · May 28, 2017, 1:59pm

Yes everything worked before.
I installed a fresh volumio 2.175 enabled and changed to iqaudio dac+

and then installed the plugin Brutefir2 for Volumio 0.2.2 (donwloaded 20 min ago)

After that the webaccess failed no I can only access volumio from ssh.

balbuze · May 28, 2017, 2:16pm

It stops working right after installing or after enabling the plugin?
Can you do a sudo journalctl -f to see what happens?

jonas18z · May 28, 2017, 2:56pm

It’s happens when I enable the plugin the the web UI stops working.

sudo journalctl -f never ends… but here is the log

volumio@volumio:~$ sudo journalctl -f 
-- Logs begin at Tue 2017-05-16 13:29:34 UTC. --
May 28 14:52:11 volumio systemd[2399]: Starting Default.
May 28 14:52:11 volumio systemd[2399]: Reached target Default.
May 28 14:52:11 volumio systemd[2399]: Startup finished in 54ms.
May 28 14:52:11 volumio systemd[1]: Started User Manager for UID 1000.
May 28 14:52:11 volumio sshd[2283]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
May 28 14:52:11 volumio sshd[2283]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
May 28 14:52:14 volumio sudo[2412]: volumio : TTY=pts/0 ; PWD=/home/volumio ; USER=root ; COMMAND=/bin/journalctl -f
May 28 14:52:14 volumio sudo[2412]: pam_unix(sudo:session): session opened for user root by volumio(uid=0)
May 28 14:52:14 volumio volumio[2381]: info: -------------------------------------------
May 28 14:52:14 volumio volumio[2381]: info: -----            Volumio2              ----
May 28 14:52:14 volumio volumio[2381]: info: -------------------------------------------
May 28 14:52:14 volumio volumio[2381]: info: -----          System startup          ----
May 28 14:52:14 volumio volumio[2381]: info: -------------------------------------------
May 28 14:52:15 volumio volumio[2381]: info: Plugin folders cleanup
May 28 14:52:15 volumio volumio[2381]: info: Scanning into folder /volumio/app/plugins/
May 28 14:52:15 volumio volumio[2381]: info: Scanning category audio_interface
May 28 14:52:15 volumio volumio[2381]: info: Scanning category miscellanea
May 28 14:52:15 volumio volumio[2381]: info: Scanning category music_service
May 28 14:52:15 volumio volumio[2381]: info: Scanning category plugins.json
May 28 14:52:15 volumio volumio[2381]: info: Scanning category system_controller
May 28 14:52:15 volumio volumio[2381]: info: Scanning category user_interface
May 28 14:52:15 volumio volumio[2381]: info: Scanning into folder /data/plugins/
May 28 14:52:15 volumio volumio[2381]: info: Scanning category miscellanea
May 28 14:52:15 volumio volumio[2381]: info: Plugin folders cleanup completed
May 28 14:52:15 volumio volumio[2381]: info: Loading plugins from folder /volumio/app/plugins/
May 28 14:52:15 volumio volumio[2381]: info: Loading plugins from folder /data/plugins/
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "system"...
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "appearance"...
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "network"...
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "services"...
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "alsa_controller"...
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "volumio_command_line_client"...
May 28 14:52:15 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:15 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:15 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:15 volumio volumio[2381]: info: Loading plugin "upnp"...
May 28 14:52:15 volumio volumio[2381]: info: [1495983135966] Starting Upmpd Daemon
May 28 14:52:16 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback
May 28 14:52:16 volumio volumio[2381]: info: Loading plugin "mpd"...
May 28 14:52:16 volumio volumio[2381]: info: Plugin upnp_browser is not enabled
May 28 14:52:16 volumio volumio[2381]: info: Loading plugin "networkfs"...
May 28 14:52:16 volumio volumio[2381]: info: Loading plugin "alarm-clock"...
May 28 14:52:16 volumio volumio[2381]: info: Loading plugin "airplay_emulation"...
May 28 14:52:16 volumio volumio[2381]: info: [1495983136372] Starting Shairport Sync
May 28 14:52:16 volumio volumio[2381]: info: Loading plugin "last_100"...
May 28 14:52:16 volumio volumio[2381]: info: Loading plugin "webradio"...
May 28 14:52:17 volumio volumio[2381]: info: Loading plugin "i2s_dacs"...
May 28 14:52:17 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam
May 28 14:52:17 volumio volumio[2381]: info: Executing start script for DAC IQaudIO DAC Plus
May 28 14:52:17 volumio volumio[2381]: info: Loading plugin "my_volumio"...
May 28 14:52:17 volumio volumio[2381]: info: Loading plugin "volumiodiscovery"...
May 28 14:52:17 volumio volumio[2381]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:17 volumio node[2381]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:17 volumio node[2381]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:17 volumio node[2381]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
May 28 14:52:17 volumio node[2381]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:17 volumio node[2381]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:17 volumio node[2381]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
May 28 14:52:17 volumio volumio[2381]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:17 volumio volumio[2381]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
May 28 14:52:17 volumio volumio[2381]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:17 volumio volumio[2381]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:17 volumio volumio[2381]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
May 28 14:52:17 volumio volumio[2381]: info: Applying required configuration parameters for plugin volumiodiscovery
May 28 14:52:18 volumio volumio[2381]: Discovery: StartAdv! undefined
May 28 14:52:18 volumio volumio[2381]: Discovery: Started advertising... Volumio - undefined
May 28 14:52:18 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback
May 28 14:52:18 volumio volumio[2381]: info: Loading plugin "albumart"...
May 28 14:52:18 volumio volumio[2381]: info: Plugin example_plugin is not enabled
May 28 14:52:18 volumio volumio[2381]: info: Loading plugin "updater_comm"...
May 28 14:52:18 volumio volumio[2381]: info: Plugin mpdemulation is not enabled
May 28 14:52:18 volumio volumio[2381]: info: Loading plugin "rest_api"...
May 28 14:52:18 volumio volumio[2381]: info: Loading plugin "websocket"...
May 28 14:52:18 volumio volumio[2381]: info: Loading plugin "brutefir"...
May 28 14:52:19 volumio volumio[2381]: info: Applying required configuration parameters for plugin brutefir
May 28 14:52:19 volumio volumio[2381]: info: ___________ START PLUGINS ___________
May 28 14:52:19 volumio volumio[2381]: PLUGIN START: appearance
May 28 14:52:19 volumio volumio[2381]: PLUGIN START: last_100
May 28 14:52:19 volumio volumio[2381]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object]
May 28 14:52:19 volumio volumio[2381]: info: [1495983139889] CoreMusicLibrary::Adding element Last_100
May 28 14:52:19 volumio volumio[2381]: PLUGIN START: webradio
May 28 14:52:19 volumio volumio[2381]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object]
May 28 14:52:19 volumio volumio[2381]: info: [1495983139922] CoreMusicLibrary::Adding element Webradio
May 28 14:52:19 volumio volumio[2381]: PLUGIN START: my_volumio
May 28 14:52:19 volumio volumio[2381]: PLUGIN START: brutefir
May 28 14:52:19 volumio volumio[2381]: info: Loading i18n strings for locale en
May 28 14:52:20 volumio volumio[2381]: Updating browse sources language
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam
May 28 14:52:20 volumio sudo[2468]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start brutefir.service
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getAlsaCards
May 28 14:52:20 volumio sudo[2468]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:20 volumio volumio[2381]: info: BOOT COMPLETED
May 28 14:52:20 volumio systemd[1]: Started brutefir Daemon.
May 28 14:52:20 volumio sudo[2468]: pam_unix(sudo:session): session closed for user root
May 28 14:52:20 volumio volumio[2381]: Express server listening on port 3000
May 28 14:52:20 volumio volumio[2381]: Volumio Calling Home
May 28 14:52:20 volumio kernel: pcm512x 1-004c: No SCLK, using BCLK: -2
May 28 14:52:20 volumio volumio[2381]: info: [1495983140306] CoreStateMachine::resetVolumioState
May 28 14:52:20 volumio volumio[2381]: info: [1495983140309] CoreStateMachine::getcurrentVolume
May 28 14:52:20 volumio volumio[2381]: info: CoreCommandRouter::volumioRetrievevolume
May 28 14:52:20 volumio volumio[2381]: info: [1495983140344] CoreStateMachine::updateTrackBlock
May 28 14:52:20 volumio volumio[2381]: info: [1495983140347] CorePlayQueue::getTrackBlock
May 28 14:52:20 volumio volumio[2381]: info: Cannot read play queue form file
May 28 14:52:20 volumio volumio[2381]: info: Brutefir Daemon Started
May 28 14:52:20 volumio volumio[2381]: info: Data script executed
May 28 14:52:20 volumio volumio[2381]: info: MPD running with PID1545 ,establishing connection
May 28 14:52:20 volumio volumio[2381]: info: Setting Device type: Raspberry PI
May 28 14:52:21 volumio volumio[2381]: info: [1495983141059] VolumeController:: Volume=100 Mute =false
May 28 14:52:21 volumio volumio[2381]: info: [1495983141067] CoreStateMachine::pushState
May 28 14:52:21 volumio volumio[2381]: info: [1495983141073] CoreStateMachine::getState
May 28 14:52:21 volumio volumio[2381]: info: [1495983141076] CorePlayQueue::getTrack 0
May 28 14:52:21 volumio volumio[2381]: info: CoreCommandRouter::volumioPushState
May 28 14:52:21 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo
May 28 14:52:21 volumio volumio[2381]: info: [1495983141096] interfaceApi::pushState
May 28 14:52:21 volumio volumio[2381]: info: [1495983141099] InterfaceWebUI::pushState
May 28 14:52:21 volumio volumio[2381]: info: Pushing Favourites {"service":"mpd","uri":"","favourite":false}
May 28 14:52:21 volumio volumio[2381]: hw:0
May 28 14:52:21 volumio volumio[2381]: info:
May 28 14:52:21 volumio volumio[2381]: info: asound.conf file written
May 28 14:52:21 volumio sudo[2486]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start upmpdcli.service
May 28 14:52:21 volumio sudo[2486]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:21 volumio systemd[1]: Started UPnP Renderer front-end to MPD.
May 28 14:52:21 volumio sudo[2488]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart airplay
May 28 14:52:21 volumio sudo[2486]: pam_unix(sudo:session): session closed for user root
May 28 14:52:21 volumio sudo[2493]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mv /home/volumio/asoundrc /etc/asound.conf
May 28 14:52:21 volumio sudo[2488]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:21 volumio sudo[2493]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:21 volumio systemd[1]: Stopping ShairportSync AirTunes receiver...
May 28 14:52:21 volumio shairport-sync[2338]: shutdown requested...
May 28 14:52:21 volumio shairport-sync[2338]: avahi: avahi_unregister.
May 28 14:52:21 volumio shairport-sync[2338]: exit...
May 28 14:52:21 volumio systemd[1]: Starting ShairportSync AirTunes receiver...
May 28 14:52:21 volumio sudo[2493]: pam_unix(sudo:session): session closed for user root
May 28 14:52:21 volumio systemd[1]: Started ShairportSync AirTunes receiver.
May 28 14:52:21 volumio sudo[2488]: pam_unix(sudo:session): session closed for user root
May 28 14:52:21 volumio volumio[2381]: No state is present for card ALSA
May 28 14:52:21 volumio volumio[2381]: Found hardware: "bcm2835" "Broadcom Mixer" "" "" ""
May 28 14:52:21 volumio volumio[2381]: Hardware is initialized using a generic method
May 28 14:52:21 volumio volumio[2381]: No state is present for card ALSA
May 28 14:52:21 volumio volumio[2381]: No state is present for card IQaudIODAC
May 28 14:52:21 volumio volumio[2381]: Found hardware: "IQaudIODAC" "" "" "" ""
May 28 14:52:21 volumio volumio[2381]: Hardware is initialized using a generic method
May 28 14:52:22 volumio volumio[2381]: No state is present for card IQaudIODAC
May 28 14:52:22 volumio volumio[2381]: No state is present for card Loopback
May 28 14:52:22 volumio volumio[2381]: Found hardware: "Loopback" "Loopback Mixer" "" "" ""
May 28 14:52:22 volumio volumio[2381]: Hardware is initialized using a generic method
May 28 14:52:22 volumio volumio[2381]: No state is present for card Loopback
May 28 14:52:22 volumio shairport-sync[2508]: startup
May 28 14:52:22 volumio shairport-sync[2508]: avahi: avahi_register.
May 28 14:52:22 volumio shairport-sync[2508]: avahi: register_service.
May 28 14:52:22 volumio shairport-sync[2508]: Avahi without metadata
May 28 14:52:22 volumio volumio[2381]: info: Connecting to daemon brutefir
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio sudo[2519]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart brutefir.service
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio sudo[2519]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:22 volumio volumio[2381]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , setConfigParam
May 28 14:52:22 volumio volumio[2381]: fs.js:951
May 28 14:52:22 volumio volumio[2381]: return binding.readdir(pathModule._makeLong(path), options.encoding);
May 28 14:52:22 volumio volumio[2381]: ^
May 28 14:52:22 volumio volumio[2381]: Error: ENOENT: no such file or directory, scandir '/data/INTERNAL/brutefirfilters'
May 28 14:52:22 volumio volumio[2381]: at Error (native)
May 28 14:52:22 volumio volumio[2381]: at Object.fs.readdirSync (fs.js:951:18)
May 28 14:52:22 volumio volumio[2381]: at ControllerBrutefir.getFilterList (/data/plugins/miscellanea/brutefir/index.js:326:5)
May 28 14:52:22 volumio volumio[2381]: at Timeout._onTimeout (/data/plugins/miscellanea/brutefir/index.js:137:6)
May 28 14:52:22 volumio volumio[2381]: at ontimeout (timers.js:365:14)
May 28 14:52:22 volumio volumio[2381]: at tryOnTimeout (timers.js:237:5)
May 28 14:52:22 volumio volumio[2381]: at Timer.listOnTimeout (timers.js:207:5)
May 28 14:52:22 volumio systemd[1]: Stopping brutefir Daemon...
May 28 14:52:22 volumio systemd[1]: Starting brutefir Daemon...
May 28 14:52:22 volumio systemd[1]: Started brutefir Daemon.
May 28 14:52:22 volumio systemd[1]: volumio.service: main process exited, code=exited, status=1/FAILURE
May 28 14:52:22 volumio sudo[2519]: pam_unix(sudo:session): session closed for user root
May 28 14:52:22 volumio volumio[2525]: BruteFIR v1.0m (November 2013)                                (c) Anders Torger
May 28 14:52:22 volumio volumio[2525]: Internal resolution is 64 bit floating point.
May 28 14:52:22 volumio volumio[2525]: Creating 4 FFTW plans of size 2048...finished.
May 28 14:52:22 volumio volumio[2525]: Loading 4 coefficient sets...finished.
May 28 14:52:22 volumio volumio[2525]: Realtime priorities are min = 2, usermax = 1, mid = 3 and max = 4.
May 28 14:52:22 volumio volumio[2525]: Warning: no support for clock cycle counter on this platform.
May 28 14:52:22 volumio volumio[2525]: Timers for benchmarking may be unreliable.
May 28 14:52:22 volumio volumio[2525]: Filters in process 0: 0 2
May 28 14:52:22 volumio volumio[2525]: Filters in process 1: 1 3
May 28 14:52:22 volumio volumio[2525]: Realtime priority 1 set for cli process (pid 2532)
May 28 14:52:22 volumio volumio[2525]: Creating inverse inplace FFTW plan of size 4096 using wisdom...finished
May 28 14:52:22 volumio volumio[2525]: Realtime priority 3 set for input process (pid 2526)
May 28 14:52:22 volumio volumio[2525]: Realtime priority 4 set for filter process (pid 2530)
May 28 14:52:22 volumio volumio[2525]: Realtime priority 4 set for filter process (pid 2531)
May 28 14:52:22 volumio volumio[2525]: Realtime priority 3 set for output process (pid 2534)
May 28 14:52:22 volumio volumio[2525]: Fixed I/O-delay is 2048 samples
May 28 14:52:22 volumio volumio[2525]: Audio processing starts now
May 28 14:52:22 volumio systemd[1]: Unit volumio.service entered failed state.
May 28 14:52:22 volumio systemd[1]: Starting dynamicswap.service...
May 28 14:52:22 volumio systemd[1]: Started dynamicswap.service.
May 28 14:52:23 volumio systemd[1]: volumio.service holdoff time over, scheduling restart.
May 28 14:52:23 volumio systemd[1]: Starting dynamicswap.service...
May 28 14:52:23 volumio systemd[1]: Started dynamicswap.service.
May 28 14:52:23 volumio systemd[1]: Stopping Volumio Backend Module...
May 28 14:52:23 volumio systemd[1]: Starting Volumio Backend Module...
May 28 14:52:23 volumio systemd[1]: Started Volumio Backend Module.
May 28 14:52:27 volumio volumio[2546]: info: -------------------------------------------
May 28 14:52:27 volumio volumio[2546]: info: -----            Volumio2              ----
May 28 14:52:27 volumio volumio[2546]: info: -------------------------------------------
May 28 14:52:27 volumio volumio[2546]: info: -----          System startup          ----
May 28 14:52:27 volumio volumio[2546]: info: -------------------------------------------
May 28 14:52:27 volumio volumio[2546]: info: Plugin folders cleanup
May 28 14:52:27 volumio volumio[2546]: info: Scanning into folder /volumio/app/plugins/
May 28 14:52:27 volumio volumio[2546]: info: Scanning category audio_interface
May 28 14:52:27 volumio volumio[2546]: info: Scanning category miscellanea
May 28 14:52:27 volumio volumio[2546]: info: Scanning category music_service
May 28 14:52:27 volumio volumio[2546]: info: Scanning category plugins.json
May 28 14:52:27 volumio volumio[2546]: info: Scanning category system_controller
May 28 14:52:27 volumio volumio[2546]: info: Scanning category user_interface
May 28 14:52:27 volumio volumio[2546]: info: Scanning into folder /data/plugins/
May 28 14:52:27 volumio volumio[2546]: info: Scanning category miscellanea
May 28 14:52:27 volumio volumio[2546]: info: Plugin folders cleanup completed
May 28 14:52:27 volumio volumio[2546]: info: Loading plugins from folder /volumio/app/plugins/
May 28 14:52:27 volumio volumio[2546]: info: Loading plugins from folder /data/plugins/
May 28 14:52:27 volumio volumio[2546]: info: Loading plugin "system"...
May 28 14:52:27 volumio volumio[2546]: info: Loading plugin "appearance"...
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "network"...
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "services"...
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "alsa_controller"...
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "volumio_command_line_client"...
May 28 14:52:28 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:28 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:28 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "upnp"...
May 28 14:52:28 volumio volumio[2546]: info: [1495983148749] Starting Upmpd Daemon
May 28 14:52:28 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "mpd"...
May 28 14:52:28 volumio volumio[2546]: info: Plugin upnp_browser is not enabled
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "networkfs"...
May 28 14:52:28 volumio volumio[2546]: info: Loading plugin "alarm-clock"...
May 28 14:52:29 volumio volumio[2546]: info: Loading plugin "airplay_emulation"...
May 28 14:52:29 volumio volumio[2546]: info: [1495983149159] Starting Shairport Sync
May 28 14:52:29 volumio volumio[2546]: info: Loading plugin "last_100"...
May 28 14:52:29 volumio volumio[2546]: info: Loading plugin "webradio"...
May 28 14:52:30 volumio volumio[2546]: info: Loading plugin "i2s_dacs"...
May 28 14:52:30 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam
May 28 14:52:30 volumio volumio[2546]: info: Executing start script for DAC IQaudIO DAC Plus
May 28 14:52:30 volumio volumio[2546]: info: Loading plugin "my_volumio"...
May 28 14:52:30 volumio volumio[2546]: info: Loading plugin "volumiodiscovery"...
May 28 14:52:30 volumio volumio[2546]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:30 volumio node[2546]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:30 volumio node[2546]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:30 volumio node[2546]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
May 28 14:52:30 volumio node[2546]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:30 volumio node[2546]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:30 volumio node[2546]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
May 28 14:52:30 volumio volumio[2546]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:30 volumio volumio[2546]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
May 28 14:52:30 volumio volumio[2546]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:30 volumio volumio[2546]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:30 volumio volumio[2546]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
May 28 14:52:30 volumio volumio[2546]: info: Applying required configuration parameters for plugin volumiodiscovery
May 28 14:52:30 volumio volumio[2546]: Discovery: StartAdv! undefined
May 28 14:52:30 volumio volumio[2546]: Discovery: Started advertising... Volumio - undefined
May 28 14:52:30 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback
May 28 14:52:30 volumio volumio[2546]: info: Loading plugin "albumart"...
May 28 14:52:30 volumio volumio[2546]: info: Plugin example_plugin is not enabled
May 28 14:52:30 volumio volumio[2546]: info: Loading plugin "updater_comm"...
May 28 14:52:31 volumio volumio[2546]: info: Plugin mpdemulation is not enabled
May 28 14:52:31 volumio volumio[2546]: info: Loading plugin "rest_api"...
May 28 14:52:31 volumio volumio[2546]: info: Loading plugin "websocket"...
May 28 14:52:31 volumio volumio[2546]: info: Loading plugin "brutefir"...
May 28 14:52:32 volumio volumio[2546]: info: Applying required configuration parameters for plugin brutefir
May 28 14:52:32 volumio volumio[2546]: info: ___________ START PLUGINS ___________
May 28 14:52:32 volumio volumio[2546]: PLUGIN START: appearance
May 28 14:52:32 volumio volumio[2546]: PLUGIN START: last_100
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object]
May 28 14:52:32 volumio volumio[2546]: info: [1495983152745] CoreMusicLibrary::Adding element Last_100
May 28 14:52:32 volumio volumio[2546]: PLUGIN START: webradio
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object]
May 28 14:52:32 volumio volumio[2546]: info: [1495983152776] CoreMusicLibrary::Adding element Webradio
May 28 14:52:32 volumio volumio[2546]: PLUGIN START: my_volumio
May 28 14:52:32 volumio volumio[2546]: PLUGIN START: brutefir
May 28 14:52:32 volumio volumio[2546]: info: Loading i18n strings for locale en
May 28 14:52:32 volumio volumio[2546]: Updating browse sources language
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam
May 28 14:52:32 volumio sudo[2611]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start brutefir.service
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getAlsaCards
May 28 14:52:32 volumio sudo[2611]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:32 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:32 volumio systemd[1]: Started brutefir Daemon.
May 28 14:52:32 volumio sudo[2611]: pam_unix(sudo:session): session closed for user root
May 28 14:52:33 volumio volumio[2546]: info: BOOT COMPLETED
May 28 14:52:33 volumio volumio[2546]: Express server listening on port 3000
May 28 14:52:33 volumio volumio[2546]: Volumio Calling Home
May 28 14:52:33 volumio kernel: pcm512x 1-004c: No SCLK, using BCLK: -2
May 28 14:52:33 volumio volumio[2546]: info: [1495983153148] CoreStateMachine::resetVolumioState
May 28 14:52:33 volumio volumio[2546]: info: [1495983153152] CoreStateMachine::getcurrentVolume
May 28 14:52:33 volumio volumio[2546]: info: CoreCommandRouter::volumioRetrievevolume
May 28 14:52:33 volumio volumio[2546]: info: [1495983153203] CoreStateMachine::updateTrackBlock
May 28 14:52:33 volumio volumio[2546]: info: [1495983153207] CorePlayQueue::getTrackBlock
May 28 14:52:33 volumio volumio[2546]: info: Cannot read play queue form file
May 28 14:52:33 volumio volumio[2546]: info: Brutefir Daemon Started
May 28 14:52:33 volumio volumio[2546]: info: Data script executed
May 28 14:52:33 volumio volumio[2546]: info: MPD running with PID1545 ,establishing connection
May 28 14:52:33 volumio volumio[2546]: info: Setting Device type: Raspberry PI
May 28 14:52:34 volumio volumio[2546]: info: Volumio called home
May 28 14:52:34 volumio volumio[2546]: hw:0
May 28 14:52:34 volumio volumio[2546]: info:
May 28 14:52:34 volumio volumio[2546]: info: [1495983154328] VolumeController:: Volume=100 Mute =false
May 28 14:52:34 volumio volumio[2546]: info: [1495983154343] CoreStateMachine::pushState
May 28 14:52:34 volumio volumio[2546]: info: [1495983154348] CoreStateMachine::getState
May 28 14:52:34 volumio volumio[2546]: info: [1495983154354] CorePlayQueue::getTrack 0
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::volumioPushState
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo
May 28 14:52:34 volumio volumio[2546]: info: [1495983154375] interfaceApi::pushState
May 28 14:52:34 volumio volumio[2546]: info: [1495983154378] InterfaceWebUI::pushState
May 28 14:52:34 volumio volumio[2546]: info: Pushing Favourites {"service":"mpd","uri":"","favourite":false}
May 28 14:52:34 volumio volumio[2546]: info: Connecting to daemon brutefir
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:34 volumio volumio[2546]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , setConfigParam
May 28 14:52:34 volumio volumio[2546]: fs.js:951
May 28 14:52:34 volumio volumio[2546]: return binding.readdir(pathModule._makeLong(path), options.encoding);
May 28 14:52:34 volumio volumio[2546]: ^
May 28 14:52:34 volumio volumio[2546]: Error: ENOENT: no such file or directory, scandir '/data/INTERNAL/brutefirfilters'
May 28 14:52:34 volumio volumio[2546]: at Error (native)
May 28 14:52:34 volumio volumio[2546]: at Object.fs.readdirSync (fs.js:951:18)
May 28 14:52:34 volumio volumio[2546]: at ControllerBrutefir.getFilterList (/data/plugins/miscellanea/brutefir/index.js:326:5)
May 28 14:52:34 volumio volumio[2546]: at Timeout._onTimeout (/data/plugins/miscellanea/brutefir/index.js:137:6)
May 28 14:52:34 volumio volumio[2546]: at ontimeout (timers.js:365:14)
May 28 14:52:34 volumio volumio[2546]: at tryOnTimeout (timers.js:237:5)
May 28 14:52:34 volumio volumio[2546]: at Timer.listOnTimeout (timers.js:207:5)
May 28 14:52:34 volumio systemd[1]: volumio.service: main process exited, code=exited, status=1/FAILURE
May 28 14:52:35 volumio systemd[1]: Unit volumio.service entered failed state.
May 28 14:52:35 volumio systemd[1]: Starting dynamicswap.service...
May 28 14:52:35 volumio systemd[1]: Started dynamicswap.service.
May 28 14:52:35 volumio systemd[1]: volumio.service holdoff time over, scheduling restart.
May 28 14:52:35 volumio systemd[1]: Starting dynamicswap.service...
May 28 14:52:35 volumio systemd[1]: Started dynamicswap.service.
May 28 14:52:35 volumio systemd[1]: Stopping Volumio Backend Module...
May 28 14:52:35 volumio systemd[1]: Starting Volumio Backend Module...
May 28 14:52:35 volumio systemd[1]: Started Volumio Backend Module.
May 28 14:52:39 volumio volumio[2638]: info: -------------------------------------------
May 28 14:52:39 volumio volumio[2638]: info: -----            Volumio2              ----
May 28 14:52:39 volumio volumio[2638]: info: -------------------------------------------
May 28 14:52:39 volumio volumio[2638]: info: -----          System startup          ----
May 28 14:52:39 volumio volumio[2638]: info: -------------------------------------------
May 28 14:52:40 volumio volumio[2638]: info: Plugin folders cleanup
May 28 14:52:40 volumio volumio[2638]: info: Scanning into folder /volumio/app/plugins/
May 28 14:52:40 volumio volumio[2638]: info: Scanning category audio_interface
May 28 14:52:40 volumio volumio[2638]: info: Scanning category miscellanea
May 28 14:52:40 volumio volumio[2638]: info: Scanning category music_service
May 28 14:52:40 volumio volumio[2638]: info: Scanning category plugins.json
May 28 14:52:40 volumio volumio[2638]: info: Scanning category system_controller
May 28 14:52:40 volumio volumio[2638]: info: Scanning category user_interface
May 28 14:52:40 volumio volumio[2638]: info: Scanning into folder /data/plugins/
May 28 14:52:40 volumio volumio[2638]: info: Scanning category miscellanea
May 28 14:52:40 volumio volumio[2638]: info: Plugin folders cleanup completed
May 28 14:52:40 volumio volumio[2638]: info: Loading plugins from folder /volumio/app/plugins/
May 28 14:52:40 volumio volumio[2638]: info: Loading plugins from folder /data/plugins/
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "system"...
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "appearance"...
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "network"...
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "services"...
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "alsa_controller"...
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "volumio_command_line_client"...
May 28 14:52:40 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:40 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:40 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:40 volumio volumio[2638]: info: Loading plugin "upnp"...
May 28 14:52:40 volumio volumio[2638]: info: [1495983160985] Starting Upmpd Daemon
May 28 14:52:41 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback
May 28 14:52:41 volumio volumio[2638]: info: Loading plugin "mpd"...
May 28 14:52:41 volumio volumio[2638]: info: Plugin upnp_browser is not enabled
May 28 14:52:41 volumio volumio[2638]: info: Loading plugin "networkfs"...
May 28 14:52:41 volumio volumio[2638]: info: Loading plugin "alarm-clock"...
May 28 14:52:41 volumio volumio[2638]: info: Loading plugin "airplay_emulation"...
May 28 14:52:41 volumio volumio[2638]: info: [1495983161407] Starting Shairport Sync
May 28 14:52:41 volumio volumio[2638]: info: Loading plugin "last_100"...
May 28 14:52:41 volumio volumio[2638]: info: Loading plugin "webradio"...
May 28 14:52:42 volumio volumio[2638]: info: Loading plugin "i2s_dacs"...
May 28 14:52:42 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam
May 28 14:52:42 volumio volumio[2638]: info: Executing start script for DAC IQaudIO DAC Plus
May 28 14:52:42 volumio volumio[2638]: info: Loading plugin "my_volumio"...
May 28 14:52:42 volumio volumio[2638]: info: Loading plugin "volumiodiscovery"...
May 28 14:52:43 volumio volumio[2638]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:43 volumio node[2638]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:43 volumio node[2638]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:43 volumio node[2638]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
May 28 14:52:43 volumio node[2638]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:43 volumio node[2638]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:43 volumio node[2638]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
May 28 14:52:43 volumio volumio[2638]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:43 volumio volumio[2638]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
May 28 14:52:43 volumio volumio[2638]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
May 28 14:52:43 volumio volumio[2638]: *** WARNING *** Please fix your application to use the native API of Avahi!
May 28 14:52:43 volumio volumio[2638]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
May 28 14:52:43 volumio volumio[2638]: info: Applying required configuration parameters for plugin volumiodiscovery
May 28 14:52:43 volumio volumio[2638]: Discovery: StartAdv! undefined
May 28 14:52:43 volumio volumio[2638]: Discovery: Started advertising... Volumio - undefined
May 28 14:52:43 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback
May 28 14:52:43 volumio volumio[2638]: info: Loading plugin "albumart"...
May 28 14:52:43 volumio volumio[2638]: info: Plugin example_plugin is not enabled
May 28 14:52:43 volumio volumio[2638]: info: Loading plugin "updater_comm"...
May 28 14:52:43 volumio volumio[2638]: info: Plugin mpdemulation is not enabled
May 28 14:52:43 volumio volumio[2638]: info: Loading plugin "rest_api"...
May 28 14:52:43 volumio volumio[2638]: info: Loading plugin "websocket"...
May 28 14:52:43 volumio volumio[2638]: info: Loading plugin "brutefir"...
May 28 14:52:44 volumio volumio[2638]: info: Applying required configuration parameters for plugin brutefir
May 28 14:52:44 volumio volumio[2638]: info: ___________ START PLUGINS ___________
May 28 14:52:44 volumio volumio[2638]: PLUGIN START: appearance
May 28 14:52:44 volumio volumio[2638]: PLUGIN START: last_100
May 28 14:52:44 volumio volumio[2638]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object]
May 28 14:52:44 volumio volumio[2638]: info: [1495983164971] CoreMusicLibrary::Adding element Last_100
May 28 14:52:45 volumio volumio[2638]: PLUGIN START: webradio
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object]
May 28 14:52:45 volumio volumio[2638]: info: [1495983165005] CoreMusicLibrary::Adding element Webradio
May 28 14:52:45 volumio volumio[2638]: PLUGIN START: my_volumio
May 28 14:52:45 volumio volumio[2638]: PLUGIN START: brutefir
May 28 14:52:45 volumio volumio[2638]: info: Loading i18n strings for locale en
May 28 14:52:45 volumio volumio[2638]: Updating browse sources language
May 28 14:52:45 volumio sudo[2703]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start brutefir.service
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam
May 28 14:52:45 volumio sudo[2703]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getAlsaCards
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:45 volumio systemd[1]: Started brutefir Daemon.
May 28 14:52:45 volumio volumio[2638]: info: BOOT COMPLETED
May 28 14:52:45 volumio sudo[2703]: pam_unix(sudo:session): session closed for user root
May 28 14:52:45 volumio volumio[2638]: Express server listening on port 3000
May 28 14:52:45 volumio volumio[2638]: Volumio Calling Home
May 28 14:52:45 volumio kernel: pcm512x 1-004c: No SCLK, using BCLK: -2
May 28 14:52:45 volumio volumio[2638]: info: [1495983165398] CoreStateMachine::resetVolumioState
May 28 14:52:45 volumio volumio[2638]: info: [1495983165402] CoreStateMachine::getcurrentVolume
May 28 14:52:45 volumio volumio[2638]: info: CoreCommandRouter::volumioRetrievevolume
May 28 14:52:45 volumio volumio[2638]: info: [1495983165437] CoreStateMachine::updateTrackBlock
May 28 14:52:45 volumio volumio[2638]: info: [1495983165441] CorePlayQueue::getTrackBlock
May 28 14:52:45 volumio volumio[2638]: info: Cannot read play queue form file
May 28 14:52:45 volumio volumio[2638]: info: Brutefir Daemon Started
May 28 14:52:45 volumio volumio[2638]: info: Data script executed
May 28 14:52:45 volumio volumio[2638]: info: MPD running with PID1545 ,establishing connection
May 28 14:52:45 volumio volumio[2638]: info: Setting Device type: Raspberry PI
May 28 14:52:46 volumio volumio[2638]: hw:0
May 28 14:52:46 volumio volumio[2638]: info:
May 28 14:52:46 volumio volumio[2638]: info: [1495983166367] VolumeController:: Volume=100 Mute =false
May 28 14:52:46 volumio volumio[2638]: info: [1495983166373] CoreStateMachine::pushState
May 28 14:52:46 volumio volumio[2638]: info: [1495983166378] CoreStateMachine::getState
May 28 14:52:46 volumio volumio[2638]: info: [1495983166381] CorePlayQueue::getTrack 0
May 28 14:52:46 volumio volumio[2638]: info: CoreCommandRouter::volumioPushState
May 28 14:52:46 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo
May 28 14:52:46 volumio volumio[2638]: info: [1495983166397] interfaceApi::pushState
May 28 14:52:46 volumio volumio[2638]: info: [1495983166404] InterfaceWebUI::pushState
May 28 14:52:46 volumio volumio[2638]: info: Pushing Favourites {"service":"mpd","uri":"","favourite":false}
May 28 14:52:46 volumio volumio[2638]: info: asound.conf file written
May 28 14:52:46 volumio sudo[2722]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start upmpdcli.service
May 28 14:52:46 volumio sudo[2724]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart airplay
May 28 14:52:46 volumio sudo[2722]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:46 volumio sudo[2724]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:46 volumio sudo[2727]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mv /home/volumio/asoundrc /etc/asound.conf
May 28 14:52:46 volumio sudo[2727]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:46 volumio sudo[2727]: pam_unix(sudo:session): session closed for user root
May 28 14:52:46 volumio systemd[1]: Stopping ShairportSync AirTunes receiver...
May 28 14:52:46 volumio systemd[1]: Started UPnP Renderer front-end to MPD.
May 28 14:52:46 volumio shairport-sync[2508]: shutdown requested...
May 28 14:52:46 volumio shairport-sync[2508]: avahi: avahi_unregister.
May 28 14:52:46 volumio shairport-sync[2508]: exit...
May 28 14:52:46 volumio sudo[2722]: pam_unix(sudo:session): session closed for user root
May 28 14:52:46 volumio systemd[1]: Starting ShairportSync AirTunes receiver...
May 28 14:52:46 volumio systemd[1]: Started ShairportSync AirTunes receiver.
May 28 14:52:46 volumio sudo[2724]: pam_unix(sudo:session): session closed for user root
May 28 14:52:46 volumio shairport-sync[2745]: startup
May 28 14:52:46 volumio shairport-sync[2745]: avahi: avahi_register.
May 28 14:52:46 volumio shairport-sync[2745]: avahi: register_service.
May 28 14:52:46 volumio shairport-sync[2745]: Avahi without metadata
May 28 14:52:46 volumio volumio[2638]: No state is present for card ALSA
May 28 14:52:46 volumio volumio[2638]: Found hardware: "bcm2835" "Broadcom Mixer" "" "" ""
May 28 14:52:46 volumio volumio[2638]: Hardware is initialized using a generic method
May 28 14:52:46 volumio volumio[2638]: No state is present for card ALSA
May 28 14:52:46 volumio volumio[2638]: No state is present for card IQaudIODAC
May 28 14:52:46 volumio volumio[2638]: Found hardware: "IQaudIODAC" "" "" "" ""
May 28 14:52:46 volumio volumio[2638]: Hardware is initialized using a generic method
May 28 14:52:46 volumio volumio[2638]: No state is present for card IQaudIODAC
May 28 14:52:46 volumio volumio[2638]: No state is present for card Loopback
May 28 14:52:46 volumio volumio[2638]: Found hardware: "Loopback" "Loopback Mixer" "" "" ""
May 28 14:52:46 volumio volumio[2638]: Hardware is initialized using a generic method
May 28 14:52:46 volumio volumio[2638]: No state is present for card Loopback
May 28 14:52:47 volumio volumio[2638]: info: Connecting to daemon brutefir
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
May 28 14:52:47 volumio volumio[2638]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , setConfigParam
May 28 14:52:47 volumio sudo[2756]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart brutefir.service
May 28 14:52:47 volumio sudo[2756]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 28 14:52:47 volumio volumio[2638]: fs.js:951
May 28 14:52:47 volumio volumio[2638]: return binding.readdir(pathModule._makeLong(path), options.encoding);
May 28 14:52:47 volumio volumio[2638]: ^
May 28 14:52:47 volumio volumio[2638]: Error: ENOENT: no such file or directory, scandir '/data/INTERNAL/brutefirfilters'
May 28 14:52:47 volumio volumio[2638]: at Error (native)
May 28 14:52:47 volumio volumio[2638]: at Object.fs.readdirSync (fs.js:951:18)
May 28 14:52:47 volumio volumio[2638]: at ControllerBrutefir.getFilterList (/data/plugins/miscellanea/brutefir/index.js:326:5)
May 28 14:52:47 volumio volumio[2638]: at Timeout._onTimeout (/data/plugins/miscellanea/brutefir/index.js:137:6)
May 28 14:52:47 volumio volumio[2638]: at ontimeout (timers.js:365:14)
May 28 14:52:47 volumio volumio[2638]: at tryOnTimeout (timers.js:237:5)
May 28 14:52:47 volumio volumio[2638]: at Timer.listOnTimeout (timers.js:207:5)
May 28 14:52:47 volumio systemd[1]: volumio.service: main process exited, code=exited, status=1/FAILURE
May 28 14:52:47 volumio sudo[2756]: pam_unix(sudo:session): session closed for user root
May 28 14:52:47 volumio systemd[1]: Unit volumio.service entered failed state.
May 28 14:52:47 volumio systemd[1]: Starting dynamicswap.service...
May 28 14:52:47 volumio systemd[1]: Started dynamicswap.service.
May 28 14:52:48 volumio systemd[1]: volumio.service holdoff time over, scheduling restart.
May 28 14:52:48 volumio systemd[1]: Starting dynamicswap.service...
May 28 14:52:48 volumio systemd[1]: Started dynamicswap.service.
May 28 14:52:48 volumio systemd[1]: Stopping Volumio Backend Module...
May 28 14:52:48 volumio systemd[1]: Starting Volumio Backend Module...
May 28 14:52:48 volumio systemd[1]: Started Volumio Backend Module.

balbuze · May 28, 2017, 3:12pm

thanks ! I was doing the same test and have the same result… There something that is not working in the last install script…
You can solve it by doingmkdir /data/INTERNAL/brutefirfilters
but you won’t get demo filters…

edit : I’m preparing a new version
edit2 : The equalizer is working even without filters
edit3: corrected version uploaded ! Remember, you must have a working system well configured (output / mixer) before you enable the plugin. Once done, set to “Loopback” the output in volumio. And then you can go in plugin settings to test the eqalizer. And important : this version don’ allow you to set the volume Warning 100% - 10db !