Hello,
I just updated from 1.2beta to 1.4.
1.2 was not very stable but worked.
Now I have the following problem:
The USB-harddrive ist mounted and accessible, which I checked using ssh.
But in the “Browse” area only “WEBRADIO” ist visible.
I tried updating database, rebooting, reseting, restarting mpd but nothing worked.
I would be clad if someone has an idea.
Thank you
bonfire
looka at what your mount point is via the mount command and then look and see whats in /etc/mpd.conf and look at the Music line to make sure its similar in the paths.
Also FYI, if youre sort of like me and like keeping updated, the other day I did a pacman -Syu and it broke a few things like this…I had to throw a mount command into my fstab to get working again.
GL.
Check that your drive has been properly unmounted before connecting…
Type
dmesg and paste results here
Thank you for your help! The mount point is OK. So heres dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.36+ (dc4@dc4-arm-01) (gcc version 4.7.2 201207 31 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #662 PREEMPT Fri Apr 4 18:31:16 BST 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr =00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruc tion cache
[ 0.000000] Machine: BCM2708
[ 0.000000] cma: CMA: reserved 16 MiB at 1e000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c05d1fbc, node_mem_map c067e00 0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 125984
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 b cm2708_fb.fbheight=416 bcm2708.boardrev=0xe bcm2708.serial=0x4acd0eb1 smsc95xx.m acaddr=B8:27:EB:CD:0E:B1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base =0x1fa00000 vc_mem.mem_size=0x20000000 force_turbo=1 dwc_otg.lpm_enable=0 conso le=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 elevato r=noop rootfstype=ext4 rootwait smsc95xx.turbo_mode=N
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 496MB = 496MB total
[ 0.000000] Memory: 480416k/480416k available, 27488k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05737ec (5550 kB)
[ 0.000000] .init : 0xc0574000 - 0xc05983e4 ( 145 kB)
[ 0.000000] .data : 0xc059a000 - 0xc05d2ad0 ( 227 kB)
[ 0.000000] .bss : 0xc05d2ad0 - 0xc067dcc0 ( 685 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4 294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.001169] Calibrating delay loop (skipped), value calculated using timer fr equency.. 2.00 BogoMIPS (lpj=10000)
[ 0.001228] pid_max: default: 32768 minimum: 301
[ 0.001702] Mount-cache hash table entries: 512
[ 0.002513] Initializing cgroup subsys memory
[ 0.002616] Initializing cgroup subsys devices
[ 0.002653] Initializing cgroup subsys freezer
[ 0.002685] Initializing cgroup subsys blkio
[ 0.002842] CPU: Testing write buffer coherency: ok
[ 0.003311] Setting up static identity map for 0xc0406ce8 - 0xc0406d44
[ 0.005071] devtmpfs: initialized
[ 0.019870] NET: Registered protocol family 16
[ 0.025918] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.027105] bcm2708.uart_clock = 0
[ 0.028956] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.029012] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.029048] mailbox: Broadcom VideoCore Mailbox driver
[ 0.029145] bcm2708_vcio: mailbox at f200b880
[ 0.029250] bcm_power: Broadcom power driver
[ 0.029288] bcm_power_open() -> 0
[ 0.029314] bcm_power_request(0, 8)
[ 0.530030] bcm_mailbox_read -> 00000080, 0
[ 0.530072] bcm_power_request -> 0
[ 0.530292] Serial: AMBA PL011 UART driver
[ 0.530478] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.875356] console [ttyAMA0] enabled
[ 0.901930] bio: create slab <bio-0> at 0
[ 0.907248] SCSI subsystem initialized
[ 0.911235] usbcore: registered new interface driver usbfs
[ 0.916951] usbcore: registered new interface driver hub
[ 0.922505] usbcore: registered new device driver usb
[ 0.929134] Switching to clocksource stc
[ 0.933477] FS-Cache: Loaded
[ 0.936642] CacheFiles: Loaded
[ 0.952283] NET: Registered protocol family 2
[ 0.957689] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.964955] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.971479] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.977963] TCP: reno registered
[ 0.981219] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.987130] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.993868] NET: Registered protocol family 1
[ 0.998794] RPC: Registered named UNIX socket transport module.
[ 1.004857] RPC: Registered udp transport module.
[ 1.009582] RPC: Registered tcp transport module.
[ 1.014331] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.021769] bcm2708_dma: DMA manager at f2007000
[ 1.026589] bcm2708_gpio: bcm2708_gpio_probe c05a7e50
[ 1.032078] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000 000(512 MiB)
[ 1.041467] audit: initializing netlink socket (disabled)
[ 1.047138] type=2000 audit(0.900:1): initialized
[ 1.208008] VFS: Disk quotas dquot_6.5.2
[ 1.212256] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.221202] FS-Cache: Netfs 'nfs' registered for caching
[ 1.227940] NFS: Registering the id_resolver key type
[ 1.233269] Key type id_resolver registered
[ 1.237481] Key type id_legacy registered
[ 1.242233] msgmni has been set to 970
[ 1.248149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
[ 1.255993] io scheduler noop registered (default)
[ 1.260821] io scheduler deadline registered
[ 1.265530] io scheduler cfq registered
[ 1.270822] BCM2708FB: allocated DMA memory 5e400000
[ 1.276001] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 1.286725] Console: switching to colour frame buffer device 82x26
[ 1.296804] uart-pl011 dev:f1: no DMA platform data
[ 1.303252] kgdb: Registered I/O driver kgdboc.
[ 1.309761] vc-cma: Videocore CMA driver
[ 1.315115] vc-cma: vc_cma_base = 0x00000000
[ 1.321081] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 1.327799] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 1.343669] brd: module loaded
[ 1.353207] loop: module loaded
[ 1.357856] vchiq: vchiq_init_state: slot_zero = 0xde000000, is_master = 0
[ 1.366949] Loading iSCSI transport class v2.0-870.
[ 1.374225] usbcore: registered new interface driver smsc95xx
[ 1.381363] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.588581] Core Release: 2.80a
[ 1.592998] Setting default values for core params
[ 1.599073] Finished setting default values for core params
[ 1.806107] Using Buffer DMA mode
[ 1.810640] Periodic Transfer Interrupt Enhancement - disabled
[ 1.817735] Multiprocessor Interrupt Enhancement - disabled
[ 1.824579] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.830193] Dedicated Tx FIFOs mode
[ 1.835489] dwc_otg: Microframe scheduler enabled
[ 1.835723] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.841926] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.850533] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.857349] Init: Port Power? op_state=1
[ 1.862528] Init: Power Port (0)
[ 1.867127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.875384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.884018] usb usb1: Product: DWC OTG Controller
[ 1.890076] usb usb1: Manufacturer: Linux 3.10.36+ dwc_otg_hcd
[ 1.897288] usb usb1: SerialNumber: bcm2708_usb
[ 1.903972] hub 1-0:1.0: USB hub found
[ 1.909085] hub 1-0:1.0: 1 port detected
[ 1.914691] dwc_otg: FIQ enabled
[ 1.914709] dwc_otg: NAK holdoff enabled
[ 1.914719] dwc_otg: FIQ split fix enabled
[ 1.914738] Module dwc_common_port init
[ 1.915192] usbcore: registered new interface driver usb-storage
[ 1.922878] mousedev: PS/2 mouse device common for all mice
[ 1.930511] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[ 1.937792] bcm2835-cpufreq: switching to governor powersave
[ 1.944802] bcm2835-cpufreq: switching to governor powersave
[ 1.951707] cpuidle: using governor ladder
[ 1.957030] cpuidle: using governor menu
[ 1.962182] sdhci: Secure Digital Host Controller Interface driver
[ 1.969629] sdhci: Copyright(c) Pierre Ossman
[ 1.975293] sdhci: Enable low-latency mode
[ 2.023168] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor m's DMA
[ 2.033647] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 2.040867] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.048009] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.057602] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.071901] usbcore: registered new interface driver usbhid
[ 2.078982] usbhid: USB HID core driver
[ 2.088825] TCP: cubic registered
[ 2.095583] Initializing XFRM netlink socket
[ 2.103297] NET: Registered protocol family 17
[ 2.109265] Key type dns_resolver registered
[ 2.118221] Indeed it is in host mode hprt0 = 00021501
[ 2.125265] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 2.153891] registered taskstats version 1
[ 2.164121] Waiting for root device /dev/mmcblk0p3...
[ 2.183231] mmc0: new high speed SDHC card at address 0002
[ 2.203397] mmcblk0: mmc0:0002 00000 7.32 GiB
[ 2.210676] mmcblk0: p1 p3
[ 2.288112] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. O pts: (null)
[ 2.299281] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 2.316910] devtmpfs: mounted
[ 2.321803] Freeing unused kernel memory: 144K (c0574000 - c0598000)
[ 2.343243] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.351379] Indeed it is in host mode hprt0 = 00001101
[ 2.554123] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.562459] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.572180] hub 1-1:1.0: USB hub found
[ 2.577862] hub 1-1:1.0: 5 ports detected
[ 2.863503] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.983890] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.992398] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 3.020373] smsc95xx v1.0.4
[ 3.088594] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1 .1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cd:0e:b1
[ 3.193566] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 3.327471] usb 1-1.2: New USB device found, idVendor=0835, idProduct=8500
[ 3.343418] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0
[ 3.352422] usb 1-1.2: Product: USB2.0 Hub
[ 3.373299] usb 1-1.2: Manufacturer: Action Star
[ 3.390390] hub 1-1.2:1.0: USB hub found
[ 3.402389] hub 1-1.2:1.0: 5 ports detected
[ 3.693759] usb 1-1.2.1: new high-speed USB device number 5 using dwc_otg
[ 3.807633] usb 1-1.2.1: New USB device found, idVendor=0835, idProduct=8501
[ 3.821336] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumb er=0
[ 3.839966] usb 1-1.2.1: Product: USB HID
[ 3.845734] usb 1-1.2.1: Manufacturer: Action Star
[ 3.865392] hid-generic 0003:0835:8501.0001: hiddev0,hidraw0: USB HID v1.11 D evice [Action Star USB HID] on usb-bcm2708_usb-1.2.1/input0
[ 3.973832] usb 1-1.2.3: new high-speed USB device number 6 using dwc_otg
[ 4.017867] udevd[156]: starting version 175
[ 4.088675] usb 1-1.2.3: New USB device found, idVendor=0480, idProduct=a006
[ 4.114035] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumb er=3
[ 4.141175] usb 1-1.2.3: Product: External USB 3.0
[ 4.171882] usb 1-1.2.3: Manufacturer: TOSHIBA
[ 4.192255] usb 1-1.2.3: SerialNumber: 20130801036074
[ 4.203619] usb-storage 1-1.2.3:1.0: USB Mass Storage device detected
[ 4.233315] scsi0 : usb-storage 1-1.2.3:1.0
[ 4.323829] usb 1-1.2.4: new high-speed USB device number 7 using dwc_otg
[ 4.461826] usb 1-1.2.4: New USB device found, idVendor=148f, idProduct=5370
[ 4.488536] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumb er=3
[ 4.513421] usb 1-1.2.4: Product: 802.11 n WLAN
[ 4.521392] usb 1-1.2.4: Manufacturer: Ralink
[ 4.543293] usb 1-1.2.4: SerialNumber: 1.0
[ 4.633762] usb 1-1.2.5: new high-speed USB device number 8 using dwc_otg
[ 4.742064] cfg80211: Calling CRDA to update world regulatory domain
[ 4.757566] usb 1-1.2.5: New USB device found, idVendor=0835, idProduct=8500
[ 4.782080] usb 1-1.2.5: New USB device strings: Mfr=1, Product=2, SerialNumb er=0
[ 4.813699] usb 1-1.2.5: Product: USB2.0 Hub
[ 4.819632] usb 1-1.2.5: Manufacturer: Action Star
[ 4.857683] hub 1-1.2.5:1.0: USB hub found
[ 4.873999] hub 1-1.2.5:1.0: 5 ports detected
[ 5.125197] bcm2708_i2c_init_pinmode(0,0)
[ 5.132292] bcm2708_i2c_init_pinmode(0,1)
[ 5.173924] usb 1-1.2.5.1: new high-speed USB device number 9 using dwc_otg
[ 5.235973] scsi 0:0:0:0: Direct-Access TOSHIBA External USB 3.0 0101 PQ : 0 ANSI: 6
[ 5.264144] sd 0:0:0:0: [sda] 2930277164 512-byte logical blocks: (1.50 TB/1. 36 TiB)
[ 5.287386] sd 0:0:0:0: [sda] Write Protect is off
[ 5.298897] usb 1-1.2.5.1: New USB device found, idVendor=0835, idProduct=850 2
[ 5.307909] sd 0:0:0:0: [sda] Mode Sense: 1f 00 00 00
[ 5.309139] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
[ 5.328697] usb 1-1.2.5.1: New USB device strings: Mfr=1, Product=2, SerialNu mber=0
[ 5.352248] usb 1-1.2.5.1: Product: USB HID
[ 5.362322] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
[ 5.374633] usb 1-1.2.5.1: Manufacturer: Action Star
[ 5.386409] hid-generic 0003:0835:8502.0002: hiddev0,hidraw1: USB HID v1.11 D evice [Action Star USB HID] on usb-bcm2708_usb-1.2.5.1/input0
[ 5.573811] usb 1-1.2.4: reset high-speed USB device number 7 using dwc_otg
[ 5.604600] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[ 5.706182] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[ 5.785313] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 d etected
[ 5.806973] bcm2708_i2c_init_pinmode(1,2)
[ 5.812832] bcm2708_i2c_init_pinmode(1,3)
[ 5.878753] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[ 5.958843] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 6.232868] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.243531] usbcore: registered new interface driver rt2800usb
[ 6.555918] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
[ 7.343660] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.355455] pcm512x 1-004c: Failed to reset device: -5
[ 7.362433] pcm512x: probe of 1-004c failed with error -5
[ 10.764813] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[ 11.232972] sda: sda1
[ 11.241383] EXT4-fs (mmcblk0p3): Mount option "nouser_xattr" will be removed by 3.5
[ 11.241383] Contact linux-ext4@vger.kernel.org if you think we should keep it .
[ 11.241383]
[ 11.277815] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.325021] EXT4-fs (mmcblk0p3): re-mounted. Opts: nouser_xattr,errors=remoun t-ro
[ 12.849707] snd-hifiberry-dac snd-hifiberry-dac.0: pcm5102a-hifi <-> bcm2708 -i2s.0 mapping ok
[ 13.395719] fuse init (API version 7.22)
[ 20.757062] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.378618] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmwa re file 'rt2870.bin'
[ 23.392803] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detec ted - version: 0.29
[ 25.527511] NET: Registered protocol family 10
[ 25.546542] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.757938] wlan0: authenticate with 50:7e:5d:91:6c:77
[ 26.856695] wlan0: send auth to 50:7e:5d:91:6c:77 (try 1/3)
[ 26.865640] wlan0: authenticated
[ 26.873277] wlan0: associate with 50:7e:5d:91:6c:77 (try 1/3)
[ 26.884015] wlan0: RX AssocResp from 50:7e:5d:91:6c:77 (capab=0x411 status=0 aid=1)
[ 26.908596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.916526] wlan0: associated
[ 33.300437] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 33.309979] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 95.893101] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 124.963144] bcm2835-cpufreq: switching to governor performance
[ 124.971531] bcm2835-cpufreq: switching to governor performanceTHANKS A LOT!
after running ntfsfix everthing was fine!
bonfire
but after rebooting the usb drive is again not visible!
Usb is still not visible!
I can´t use volumio any more. 
Has anybody an idea
Bonfire
This is the problem. Your drive is corrupted. This happens particularly when you disconnect from windows without unmounting it. Linux is very choosy when it comes to fat fileystems…
So, try to check it with scandisk on windows, or repair it. And always shut down volumio properly. Then it will work. Another solution could be that you are using lot of devices on your hub, and power is not sufficient for your drive.
This is not a Volumio problem, since your drive /dev/sda1 is properly recognized (and mounted when possible) you’ll have same problem with any linux machine…
Let me know how it goes.
I removed the wlan module to reduce power consumption. Now only the pi an the harddrive are connected.
The harddrive was formated, data copied again, double checked in windows, carefully removed, pi rebooted.
I tried it many times, nothing worked. No library is visible.
It worked (even with wlan) with the older version of volumio.
What I don’t understand is the fact, that the harddrive is mounted and all data can be accessed manually
with ssh. Why is the drive not visible for volumio?
Greetings
Bonfire
While the database is updating I can see the USB device in the “browse”-area
and I can access the folders and files at the harddrive.
When the update is ready only webradio is visible in the browse area.
It seems to be a volumio error.
Greetings Bonfire
I too am having the same problem running Volumio 1.1 and 1.3Beta on Compulab Utilite. On both versions Webradio only is visible. I am a novice and am not sure how relevant this might be, but in both versions the FUSE module has not been loaded. In version 1.3 Beta Wlan() is not loaded either. I run Volumio on my Pi and am very impressed ,so much so that when I saw Volumio was available for the Utilite I purchased one. I hope the USB drive problem is sorted quickly (and the lack of wireless) is rectified quickly so that I can us the Utilite. I should add that the drives (3) tried on the utilite run perfectly on the Pi (early ver). Many thanks and look forward to the day I can use the Utilite.
I would just like to add to my previous comment…the version of Volumio I run on the Pi is !.1. My Utilite is the standard model. The 1.3Beta.img file downloaded for the Utilite, when run reports on my monitor as version 1.2? One last niggle is that the BOOT screen output has been suppressed. I do not understand suppressing an immediate source of information? I look forward to reading any comments.
I too have the same problem with my USB HD. The above post by Michaelangelo did not solve the problem. AFAIK, mmcblk0p1 refers to MMC Memory which is where the volumio resides, not the USB HD.
So please, any solution here? My MMC memory is only 7 GB while my HD Music is much larger than that.
My apology, I skipped this. So it is a power problem but also the number of available USB ports of Raspberry Pi (only two). 1 port for USB DAC, 1 port for USB HD (externally powered). The microUSB power must also be connected.
There you go, the USB 3.0 Hard Disk is there and the song plays. 
Thank you Michaelangelo. I’ve been a fan since Raspy Fi.