Hi all,
My DAC doesn’t work with my Moon 100D DAC. I don’t hear any sound when it is plugged. There is sound over HDMI.
I tried to use the DAC over a powered USB hub and connected to the Raspberry Pi
volumio@volumio:~$ uname -a
Linux volumio 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux
It doesn’t show in alsamixer. Here’s the output when I plug it in:
volumio@volumio:~$ dmesg
[ 1978.715731] usb 1-1.3.6: USB disconnect, device number 7
[ 1992.920791] usb 1-1.3.6: new full-speed USB device number 8 using dwc_otg
[ 1993.205245] usb 1-1.3.6: New USB device found, idVendor=08bb, idProduct=2705
[ 1993.221532] usb 1-1.3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1993.236785] usb 1-1.3.6: Product: USB Audio DAC
[ 1993.248990] usb 1-1.3.6: Manufacturer: Burr-Brown from TI
[ 1993.268259] input: Burr-Brown from TI USB Audio DAC as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.6/1-1.3.6:1.2/input/input2
[ 1993.292288] hid-generic 0003:08BB:2705.0003: input,hidraw1: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-bcm2708_usb-1.3.6/input2
When I run “lsusb -t” I noticed there is no driver for the DAC:
|__ Port 6: Dev 7, If 0, Class=audio, Driver=, 12M
|__ Port 6: Dev 7, If 1, Class=audio, Driver=, 12M
|__ Port 6: Dev 7, If 2, Class=HID, Driver=usbhid, 12M
When I plug the DAC in my laptop (running Ubuntu kernel 3.11.0-15) I see a driver being loaded:
|__ Port 1: Dev 3, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 3, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
Is there any chance I can get my DAC working with Volumio? Thx