For some of the remotes (Atrix Remote, JustBoom IR Remote, Odroid Remote, Samsung AA59-00431A, Samsung_BN59-006XXA, Xiaomi IR for TV box and Yamaha RAV363) a key has been bound to a command to shutdown the complete system (have a look at the lircrc files, you can inspect here). The other remote configurations allow (amongst others) to stop playback.
I have another Pi 4 that i had created the Kodi media to player on my tv, instead of dvd i have MP4s.
So, i been looking at heatsinks, Copper and Aluminum heatsinks. What would be cooler to use on the Pi 4
So, the player is up and running i got my flash drive in with 461 mp3 songs.
I have a soundbar mounted to the wall… It has three channels on it, Audio 1 for the radio and Audio 2 for the Music player. The music sounds good just the normal audio jack on the Raspberry Pi 4. Put i hears things about the HiFi DAC HAT. How good is the sound when connected to the HiFi HAT.
How good is the sound from the HiFiBerry DAC HiFiBerry DAC+ Pro
Every now and then there have been reports of problems with the Apple remotes. You find some more info here. Unfortunately the links in the post are broken but they all refer to other posts in the “[PLUGIN] IR Remote Controller feedback thread”.
If i find an Apple remote that Volumio offers Then i can shutdown the Volumio player but since it don’t turn off the Pi, I’m looking for a board that let u turn off the Pi board
So how do i access the logs or what i mean is if i use SSH on my laptop make it much easy to work. So first it ask me to login and then do i type in /dev or livelog
now that i have the player up and running on my pi 4 how do i get a remote running on it. I bought the two Apple remotes that it has list in the plugins but as i tried both remotes. A1156 and A2195 they still don’t work. i saved and rebooted the player.
I have two Apple remotes A1156 and A1294 like it shows in the “IR Remote Controller.” that shows the remotes in settings here
I tried each of the Apple remotes and save/ rebooted and nothing happen.
So how do i get to the IR remote Configurations to get the remote going on the player.
So all i need to do is in the plugin, select JustBoom that i got, set the GPIO configurations to GPIO 24. Then do i just connect the jumper wire from the Single out/Ground/ power from the IR sensor to the ground 3.3vol GPIO 24 and reboot.
If not already done: Make sure before choosing GPIO 24 that it is not already used elsewhere, e.g. by a DAC.
Also note that the GPIO number is not the number of the physical pin to which the infrared receiver is connected, but the Broadcom pin number (BCM), cf. GPIO 24 at Raspberry Pi GPIO Pinout.