Using the mini as I don’t trust nano’s much.
2 Likes
Greetings again.
I’ve installed the T3U mini, but I have a recurring problem. The WiFi does not start on reboot.
I need to connect LAN cable to find Volumio on the network. Under Network Status, only wired network is visible.
If I then click Save for Wireless network settings to manually restart the Wifi, then WiFi starts and I can disconnect LAN.
I’ve tried factory reset.
TP T3U is connected to a USB 3 port (tried USB 2 - no change).
Hotspot fallback is not working on boot either. In fact, the LED on the T3U doesn’t blink at all, like it is not powered on.
Hardware is standard HP 620 thin client.
Volumio-3.396-2022-12-04-x86_amd64
Router AP is Fritz!Box 7530, Wifi SSID is not hidden, using channel 1.
Many thanks for any help, I’m a bit stumped.
As to the log and cli info in this post, please note it was collected after I manually restarted the WiFi and it begins to work.
Log output is here.
sudo lshw output:
description: Desktop Computer
product: HP t620 Dual Core TC (F5A53AA#ABG)
vendor: Hewlett-Packard
version: To Be Filled By O.E.M.
serial: 8CN61200YS
width: 64 bits
capabilities: smbios-2.8 dmi-2.8 smp vsyscall32
configuration: boot=normal chassis=desktop family=103C_53302C G=D sku=F5A53AA#ABG uuid=027A5ADD-12DC-58ED-EA28-9CF80AEFD150
*-core
description: Motherboard
product: 2187
vendor: Hewlett-Packard
physical id: 0
version: A01
*-firmware
description: BIOS
vendor: AMI
physical id: 0
version: L40 v02.10
date: 07/03/2015
size: 64KiB
capacity: 1MiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification netboot uefi
*-memory
description: System Memory
physical id: 26
slot: System board or motherboard
size: 4GiB
*-bank:0
description: SODIMM DDR3 [empty]
product: A1_PartNum0
vendor: A1_Manufacturer0
physical id: 0
serial: A1_SerialNum0
slot: DIMM 0
width: 64 bits
*-bank:1
description: SODIMM DDR3 Synchronous Unbuffered (Unregistered) 1600 MHz (0.6 ns)
product: M471B5173EB0-YK0
vendor: Samsung
physical id: 1
serial: 41611B92
slot: DIMM 1
size: 4GiB
width: 64 bits
clock: 1600MHz (0.6ns)
*-cache:0
description: L1 cache
physical id: 2c
slot: L1 CACHE
size: 128KiB
capacity: 128KiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
physical id: 2d
slot: L2 CACHE
size: 1MiB
capacity: 1MiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
configuration: level=2
*-cpu
description: CPU
product: AMD GX-217GA SOC with Radeon(tm) HD Graphics
vendor: Advanced Micro Devices [AMD]
physical id: 2e
bus info: cpu@0
version: AMD GX-217GA SOC with Radeon(tm) HD Graphics
slot: P0
size: 1488MHz
capacity: 1650MHz
width: 64 bits
clock: 100MHz
capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb bpext perfctr_llc hw_pstate proc_feedback ssbd vmmcall bmi1 xsaveopt arat npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold overflow_recov cpufreq
configuration: cores=2 enabledcores=2 threads=2
*-pci:0
description: Host bridge
product: Family 16h Processor Root Complex
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: Kabini [Radeon HD 8280E]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:35 memory:c0000000-cfffffff memory:d0000000-d07fffff ioport:f000(size=256) memory:feb00000-feb3ffff memory:c0000-dffff
*-multimedia:0
description: Audio device
product: Kabini HDMI/DP Audio
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1.1
bus info: pci@0000:00:01.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:33 memory:feb64000-feb67fff
*-pci
description: PCI bridge
product: Family 16h Processor Functions 5:1
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 2.3
bus info: pci@0000:00:02.3
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25 ioport:e000(size=4096) memory:fea00000-feafffff ioport:d0800000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 0c
serial: 7c:d3:0a:1e:48:03
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.139-volumio firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=twisted pair
resources: irq:30 ioport:e000(size=256) memory:fea00000-fea00fff memory:d0800000-d0803fff
*-usb:0
description: USB controller
product: FCH USB XHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 10
bus info: pci@0000:00:10.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:18 memory:feb68000-feb69fff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 5.10.139-volumio xhci-hcd
physical id: 0
bus info: usb@5
logical name: usb5
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Generic USB device
product: 802.11ac NIC
vendor: Realtek
physical id: 1
bus info: usb@5:1
version: 2.10
serial: 123456
capabilities: usb-2.10
configuration: driver=rtl88x2bu maxpower=500mA speed=480Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 5.10.139-volumio xhci-hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 5.10
capabilities: usb-3.00
configuration: driver=hub slots=2 speed=5000Mbit/s
*-sata
description: SATA controller
product: FCH SATA Controller [AHCI mode]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 11
bus info: pci@0000:00:11.0
logical name: scsi1
version: 40
width: 32 bits
clock: 66MHz
capabilities: sata pm msi ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci latency=32
resources: irq:29 ioport:f140(size=8) ioport:f130(size=4) ioport:f120(size=8) ioport:f110(size=4) ioport:f100(size=16) memory:feb6e000-feb6e3ff
*-disk
description: ATA Disk
product: SanDisk SDSA6MM-
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sda
version: 006
serial: 160817406334
size: 14GiB (16GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=2bc7fd2b-4c38-4046-a38a-e08927d044bb logicalsectorsize=512 sectorsize=512
*-volume:0
description: Windows FAT volume
vendor: SYSLINUX
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sda1
logical name: /boot
version: FAT32
serial: 41e1-e59d
size: 169MiB
capacity: 170MiB
capabilities: boot fat initialized
configuration: FATs=2 filesystem=fat label=boot mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=437,iocharset=utf8,shortname=mixed,utf8,errors=remount-ro name=primary state=mounted
*-volume:1
description: EXT4 volume
vendor: Linux
physical id: 2
bus info: scsi@1:0.0.0,2
logical name: /dev/sda2
logical name: /imgpart
version: 1.0
serial: c9596fa0-7863-4a53-b9f7-9fe7d6223ee4
size: 3452MiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2023-01-13 04:54:54 filesystem=ext4 label=volumio lastmountpoint=/mnt/imgpart modified=2023-01-18 00:44:12 mount.fstype=ext4 mount.options=rw,relatime mounted=2023-01-18 00:44:12 name=primary state=mounted
*-volume:2
description: EXT4 volume
vendor: Linux
physical id: 3
bus info: scsi@1:0.0.0,3
logical name: /dev/sda3
version: 1.0
serial: 5a172840-f010-4fe7-8721-9806146cf433
size: 11GiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2023-01-18 00:26:30 filesystem=ext4 label=volumio_data lastmountpoint=/mnt/ext/union modified=2023-01-18 00:38:20 mounted=2023-01-18 00:38:20 name=primary state=clean
*-usb:1
description: USB controller
product: FCH USB OHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 12
bus info: pci@0000:00:12.0
version: 39
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=32
resources: irq:18 memory:feb6d000-feb6dfff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.139-volumio ohci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=4 speed=12Mbit/s
*-usb
description: Audio device
product: USB Audio CODEC
vendor: Burr-Brown from TI
physical id: 1
bus info: usb@3:1
version: 1.00
capabilities: usb-1.10 audio-control
configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
*-usb:2
description: USB controller
product: FCH USB EHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 12.2
bus info: pci@0000:00:12.2
version: 39
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:17 memory:feb6c000-feb6c0ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.139-volumio ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: Mass storage device
product: Silicon-Power16G
vendor: UFD 2.0
physical id: 4
bus info: usb@1:4
logical name: scsi2
version: 1.00
serial: P1601370070B65D2B1B4CE84
capabilities: usb-2.00 scsi emulated
configuration: driver=usb-storage maxpower=200mA speed=480Mbit/s
*-disk
description: SCSI Disk
product: Silicon-Power16G
vendor: UFD 2.0
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sdb
version: PMAP
serial: P6156D021B31
size: 14GiB (15GB)
capabilities: removable
configuration: ansiversion=6 logicalsectorsize=512 sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdb
size: 14GiB (15GB)
capabilities: partitioned partitioned:dos
configuration: signature=dab74ad7
*-volume
description: Windows NTFS volume
physical id: 1
logical name: /dev/sdb1
logical name: /media/PINK
version: 3.1
serial: a0a2-5df0
size: 14GiB
capacity: 14GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2022-10-11 00:08:45 filesystem=ntfs label=PINK mount.fstype=fuseblk mount.options=rw,noatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted
*-usb:3
description: USB controller
product: FCH USB OHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 13
bus info: pci@0000:00:13.0
version: 39
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=32
resources: irq:18 memory:feb6b000-feb6bfff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.139-volumio ohci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=4 speed=12Mbit/s
*-usb:4
description: USB controller
product: FCH USB EHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 13.2
bus info: pci@0000:00:13.2
version: 39
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:17 memory:feb6a000-feb6a0ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.139-volumio ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-serial
description: SMBus
product: FCH SMBus Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 14
bus info: pci@0000:00:14.0
version: 3a
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0
resources: irq:0
*-multimedia:1
description: Audio device
product: FCH Azalia Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 14.2
bus info: pci@0000:00:14.2
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=snd_hda_intel latency=32
resources: irq:16 memory:feb60000-feb63fff
*-isa
description: ISA bridge
product: FCH LPC Bridge
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 14.3
bus info: pci@0000:00:14.3
version: 11
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:1
description: Host bridge
product: Family 16h Processor Function 0
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 101
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: Family 16h Processor Function 0
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 102
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: Family 16h Processor Function 1
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 103
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: Family 16h Processor Function 2
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 104
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: Family 16h Processor Function 3
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 105
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: Family 16h Processor Function 4
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 106
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: Family 16h Processor Function 5
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 107
bus info: pci@0000:00:18.5
version: 00
width: 32 bits
clock: 33MHz
*-pnp00:00
product: PnP device PNP0c01
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: PnP device PNP0c02
physical id: 2
capabilities: pnp
configuration: driver=system
*-pnp00:02
product: PnP device PNP0c02
physical id: 3
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: PnP device PNP0c02
physical id: 4
capabilities: pnp
configuration: driver=system
*-pnp00:04
product: PnP device PNP0b00
physical id: 5
capabilities: pnp
configuration: driver=rtc_cmos
*-pnp00:05
product: PnP device PNP0c02
physical id: 6
capabilities: pnp
configuration: driver=system
*-pnp00:06
product: PnP device PNP0303
physical id: 7
capabilities: pnp
configuration: driver=i8042 kbd
*-pnp00:07
product: PnP device PNP0f03
physical id: 8
capabilities: pnp
configuration: driver=i8042 aux
*-pnp00:08
product: PnP device PNP0501
physical id: 9
capabilities: pnp
configuration: driver=serial
*-pnp00:09
product: PnP device IFX0102
physical id: a
capabilities: pnp
configuration: driver=tpm_tis
*-pnp00:0a
product: PnP device PNP0c02
physical id: b
capabilities: pnp
configuration: driver=system
*-power UNCLAIMED
product: Standard Efficiency
physical id: 1
capacity: 32768mWh
*-network
description: Wireless interface
physical id: 2
bus info: usb@5:1
logical name: wlan0
serial: b0:a7:b9:0b:88:25
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl88x2bu driverversion=5.10.139-volumio ip=10.1.1.143 multicast=yes wireless=IEEE 802.11AC
inxi -Fxxxz output:
System:
Host: volumio Kernel: 5.10.139-volumio x86_64 bits: 64 compiler: N/A
Console: tty 0 dm: N/A Distro: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop System: Hewlett-Packard product: HP t620 Dual Core TC v: N/A
serial: <filter>
Mobo: Hewlett-Packard model: 2187 v: A01 serial: <filter> UEFI: AMI
v: L40 v02.10 date: 07/03/2015
CPU:
Topology: Dual Core model: AMD GX-217GA SOC with Radeon HD Graphics
bits: 64 type: MCP arch: Jaguar rev: 1 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 6587
Speed: 1249 MHz min/max: 800/1650 MHz Core speeds (MHz): 1: 1334 2: 1487
Graphics:
Device-1: AMD Kabini [Radeon HD 8280E] vendor: Hewlett-Packard
driver: radeon v: kernel bus ID: 00:01.0 chip ID: 1002:9837
Display: tty server: X.org 1.20.4 driver: ati,radeon
unloaded: fbdev,modesetting,vesa tty: 80x61
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: AMD Kabini HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:01.1 chip ID: 1002:9840
Device-2: AMD FCH Azalia vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:14.2 chip ID: 1022:780d
Device-3: Texas Instruments PCM2902 Audio Codec type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 3-1:2 chip ID: 08bb:2902
Sound Server: ALSA v: k5.10.139-volumio
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: e000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: TP-Link type: USB driver: rtl88x2bu bus ID: 5-1:2
chip ID: 2357:012d serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 29.36 GiB used: 2.28 GiB (7.8%)
ID-1: /dev/sda vendor: SanDisk model: SDSA6MM-016G-1006 size: 14.91 GiB
speed: 6.0 Gb/s serial: <filter> rev: 006 scheme: GPT
ID-2: /dev/sdb type: USB model: UFD 2.0 Silicon-Power16G size: 14.45 GiB
serial: <filter> rev: PMAP scheme: MBR
Partition:
ID-1: / size: 11.09 GiB used: 51.3 MiB (0.5%) fs: overlay source: ERR-102
ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.3%) fs: vfat dev: /dev/sda1
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Info:
Processes: 129 Uptime: 29m Memory: 3.29 GiB used: 491.9 MiB (14.6%)
Init: systemd v: 241 runlevel: 5 default: 2 Compilers: gcc: N/A
Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
Some additional info collected right after boot, when WiFi is not working but LAN is.
/var/log/boot.log output:
[e[0;32m OK e[0m] Started e[0;1;39mShow Plymouth Boot Screene[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mLocal Encrypted Volumese[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mPathse[0m.
[e[0;32m OK e[0m] Started e[0;1;39mForward Password Requests to Plymouth Directory Watche[0m.
[e[0;32m OK e[0m] Found device e[0;1;39mSanDisk_SDSA6MM-016G-1006 boote[0m.
Starting e[0;1;39mFile System Check on /dev/disk/by-uuid/41E1-E59De[0m...
[e[0;32m OK e[0m] Listening on e[0;1;39mLoad/Save RF Kill Switch Status /dev/rfkill Watche[0m.
[e[0;32m OK e[0m] Started e[0;1;39mFile System Check Daemon to report statuse[0m.
[e[0;32m OK e[0m] Started e[0;1;39mFile System Check on /dev/disk/by-uuid/41E1-E59De[0m.
Mounting e[0;1;39m/boote[0m...
[e[0;32m OK e[0m] Mounted e[0;1;39m/boote[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mLocal File Systemse[0m.
Starting e[0;1;39mTell Plymouth To Write Out Runtime Datae[0m...
Starting e[0;1;39mCreate Volatile Files and Directoriese[0m...
Starting e[0;1;39mPreprocess NFS configuratione[0m...
[e[0;32m OK e[0m] Found device e[0;1;39mRTL8111/8168/8411 PCI Express Gigabit Ethernet Controllere[0m.
[e[0;32m OK e[0m] Started e[0;1;39mTell Plymouth To Write Out Runtime Datae[0m.
[e[0;32m OK e[0m] Started e[0;1;39mPreprocess NFS configuratione[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mNFS client servicese[0m.
[e[0;32m OK e[0m] Started e[0;1;39mifup for eth0e[0m.
[e[0;32m OK e[0m] Started e[0;1;39mCreate Volatile Files and Directoriese[0m.
Starting e[0;1;39mRPC bind portmap servicee[0m...
[e[0;32m OK e[0m] Started e[0;1;39mEntropy daemon using the HAVEGE algorithme[0m.
Starting e[0;1;39mUpdate UTMP about System Boot/Shutdowne[0m...
Starting e[0;1;39mTell Plymouth To Write Out Runtime Datae[0m...
[e[0;32m OK e[0m] Started e[0;1;39mTell Plymouth To Write Out Runtime Datae[0m.
[e[0;32m OK e[0m] Started e[0;1;39mUpdate UTMP about System Boot/Shutdowne[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mSystem Initializatione[0m.
[e[0;32m OK e[0m] Listening on e[0;1;39mD-Bus System Message Bus Sockete[0m.
[e[0;32m OK e[0m] Listening on e[0;1;39mmpd.sockete[0m.
[e[0;32m OK e[0m] Listening on e[0;1;39mtriggerhappy.sockete[0m.
[e[0;32m OK e[0m] Started e[0;1;39mDaily man-db regeneratione[0m.
[e[0;32m OK e[0m] Started e[0;1;39mDaily apt download activitiese[0m.
[e[0;32m OK e[0m] Started e[0;1;39mDaily apt upgrade and clean activitiese[0m.
[e[0;32m OK e[0m] Started e[0;1;39mDaily Cleanup of Temporary Directoriese[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mTimerse[0m.
[e[0;32m OK e[0m] Listening on e[0;1;39mAvahi mDNS/DNS-SD Stack Activation Sockete[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mSocketse[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mBasic Systeme[0m.
Starting e[0;1;39mWireless Servicese[0m...
Starting e[0;1;39mtriggerhappy global hotkey daemone[0m...
[e[0;32m OK e[0m] Started e[0;1;39mManage Sound Card State (restore and store)e[0m.
Starting e[0;1;39mSave/Restore Sound Card Statee[0m...
[e[0;32m OK e[0m] Started e[0;1;39mD-Bus System Message Buse[0m.
Starting e[0;1;39mDHCP Client Daemone[0m...
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Iptables Modulee[0m.
[e[0;32m OK e[0m] Started e[0;1;39mvolumio-remote-updater.servicee[0m.
[e[0;32m OK e[0m] Started e[0;1;39mUPnP Renderer front-end to MPDe[0m.
Starting e[0;1;39mWPA supplicante[0m...
Starting e[0;1;39mLogin Servicee[0m...
Starting e[0;1;39mAvahi mDNS/DNS-SD Stacke[0m...
[e[0;32m OK e[0m] Started e[0;1;39mLogin Servicee[0m.
[e[0;32m OK e[0m] Started e[0;1;39mtriggerhappy global hotkey daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mRPC bind portmap servicee[0m.
[e[0;32m OK e[0m] Started e[0;1;39mDHCP Client Daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mAvahi mDNS/DNS-SD Stacke[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mRemote File Systems (Pre)e[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mRemote File Systemse[0m.
Starting e[0;1;39mLSB: Load kernel modules needed to enable cpufreq scalinge[0m...
[e[0;32m OK e[0m] Reached target e[0;1;39mRPC Port Mappere[0m.
[e[0;32m OK e[0m] Started e[0;1;39mWPA supplicante[0m.
[e[0;32m OK e[0m] Started e[0;1;39mLSB: Load kernel modules needed to enable cpufreq scalinge[0m.
Starting e[0;1;39mLSB: set CPUFreq kernel parameterse[0m...
[e[0;32m OK e[0m] Started e[0;1;39mSave/Restore Sound Card Statee[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mSound Carde[0m.
[e[0;32m OK e[0m] Started e[0;1;39mLSB: set CPUFreq kernel parameterse[0m.
[e[0;1;31mFAILEDe[0m] Failed to start e[0;1;39mWireless Servicese[0m.
See 'systemctl status wireless.service' for details.
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Backend Modulee[0m.
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mIntel SST and HDA soundcard init servicee[0m.
[e[0;32m OK e[0m] Started e[0;1;39mStart Volumio Kioske[0m.
[e[0;32m OK e[0m] Stopped e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Stopped e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Stopped e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Stopped e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Started e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;32m OK e[0m] Stopped e[0;1;39mVolumio Streaming Daemone[0m.
[e[0;1;31mFAILEDe[0m] Failed to start e[0;1;39mVolumio Streaming Daemone[0m.
See 'systemctl status volumio-streaming-daemon.service' for details.
Starting e[0;1;39mLoad/Save RF Kill Switch Statuse[0m...
[e[0;32m OK e[0m] Started e[0;1;39mLoad/Save RF Kill Switch Statuse[0m.
[e[0;32m OK e[0m] Found device e[0;1;39m802.11ac_NICe[0m.
[e[0;32m OK e[0m] Started e[0;1;39mifup for wlan0e[0m.
[e[0;32m OK e[0m] Started e[0;1;39mHelper to synchronize boot up for ifupdowne[0m.
Starting e[0;1;39mRaise network interfacese[0m...
[e[0;32m OK e[0m] Started e[0;1;39mRaise network interfacese[0m.
[e[0;32m OK e[0m] Reached target e[0;1;39mNetworke[0m.
Starting e[0;1;39mMusic Player Daemone[0m...
Starting e[0;1;39mOpenBSD Secure Shell servere[0m...
Starting e[0;1;39mNetwork Time Servicee[0m...
Starting e[0;1;39mPermit User Sessionse[0m...
[e[0;32m OK e[0m] Reached target e[0;1;39mNetwork is Onlinee[0m.
Starting e[0;1;39mSamba NMB Daemone[0m...
Starting e[0;1;39mLSB: Brings up/down network automaticallye[0m...
Starting e[0;1;39m/etc/rc.local Compatibilitye[0m...
[e[0;32m OK e[0m] Started e[0;1;39mShairport Sync - AirPlay Audio Receivere[0m.
[e[0;32m OK e[0m] Started e[0;1;39mPermit User Sessionse[0m.
[e[0;32m OK e[0m] Started e[0;1;39m/etc/rc.local Compatibilitye[0m.
Starting e[0;1;39mHold until boot process finishes upe[0m...
Starting e[0;1;39mTerminate Plymouth Boot Screene[0m...
systemctl status wireless.service output:
volumio@volumio:/var/log$ systemctl status wireless.service
wireless.service - Wireless Services
Loaded: loaded (/lib/systemd/system/wireless.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2023-01-18 02:46:22 UTC; 4min 8s ago
Process: 424 ExecStart=/volumio/app/plugins/system_controller/network/wireless.js start (code=exited, status=1/FAILURE)
Jan 18 02:46:18 volumio systemd[1]: Starting Wireless Services...
Jan 18 02:46:22 volumio wireless.js[424]: WIRELESS: No wireless interface, exiting
Jan 18 02:46:22 volumio systemd[1]: wireless.service: Control process exited, code=exited, status=1/FAILURE
Jan 18 02:46:22 volumio systemd[1]: wireless.service: Failed with result 'exit-code'.
Jan 18 02:46:22 volumio systemd[1]: Failed to start Wireless Services.
With my google fu I came to the following work-around for this. But if anyone knows the root cause I’d love to hear it.
Work-around, via ssh:
Make a script in the home folder called start.sh
nano start.sh
Contents of start.sh:
#!/bin/bash
systemctl restart wireless
Make start.sh executable:
sudo chmod +x start.sh
Install cron:
sudo apt-get update
sudo apt-get install cron
add a crontab entry with root rights:
sudo crontab -e
contents of crontab:
@reboot sleep 30 && /home/volumio/start.sh
Disconnect LAN, and reboot. Patiently. 
Me as well, I have not seen this behaviour on my DELL Wyse 3040.
And it has not been reported by other T3U users either.
Looks like the settings are not stored properly.
Did you do a proper shutdown/restart?
Unfortunately I can’t test on the rest of the test equipment here as they all have internal wireless.
Stumped nr3 here.
Have tested this one on 3 different x86 without any issues.
- Dell Wyse 3040
- HP Elitedesk
- Toshiba Click mini
Thanks for looking into it. Yes, proper shutdown/restart. Could you expand a little on “the settings are not stored properly” ? Which settings in particular? To me it looks like the T3U never gets an initial start from the OS.
Yes, same T3U here. Thanks for the report. At least for now, the work-around startup script seems solid.
1 Like
boot.log does not say much, we need a proper volumio log --or-- a complete dmesg
Log output is here
starting without my script systemctl restart wireless solution…
dmesg full output is here
dmesg less output is here
…if you still have patience to look into this.
Thanks
I don’t see the wifi dongle, at any point, being probed.
What do you see with a simple lsusb? Nothing I suppose.
Did you enable usb in the BIOS? Sometimes this is disabled with thin clients.
Hi Gé,
Seems something is broken in the x86 image related to the discovery of DNLA/uPnP servers.
While the V3.396 on the rPi shows them,
x86 V3.224 and up won’t show them:
Fyi, the beta builds also shows them.
There is hardly an x86 dependency here, the x86 build does pull a few platform-specific pre-compiled packages, but these have not been updated since the beginning of Volumio 3. The main part is standard, platform independent Volumio stuff.
If there is a difference between versions, then it must be in the Volumio part. Does the same apply to a PI build?
1 Like
For the rPi i’ve tested and they all show the LMS server:
volumio-2.917-2021-10-06-pi.img
Volumio-3.175-2021-12-13-pi.img
Volumio-3.179-2021-12-20-pi.img
Volumio-3.198-2022-01-24-pi.img
Volumio-3.301-2022-06-09-pi.img
Volumio-3.324-2022-07-11-pi.img
No idea, what about a log? Does it show any error on DLNA/uPnP communication?
Unless there is something with the myVolumio part, did you try the latest x86 test build? It is closest to the beta build…
V3.396
http://logs.volumio.org/volumio/JPtEZzu.html
V3.422 (also not showing the LMS server)
http://logs.volumio.org/volumio/OurA9JS.html
1 Like
Shoot me but leakage. (schiet mij maar lek)
Seems the issue is only with the HP’s 
Tested again with the
Dell Wyse 3040 (V3.396)
Toshiba click mini (V3.422):
Both HP Elitedesk (V3.396):
Dell Inspiron 3180 (V3.396):
Odroid N2+ with 3.426 not showing anything either (I snap there also no ball from)
Yep, same for Odroid N2+ V3.417. No DNLA/uPnp