Hi It didn’t work on the stable version
Follows the Information:
Logs http://logs.volumio.org/volumiobuster/J0TSLBc.html
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G96M [GeForce 9600M GT] (rev a1)
02:00.0 Ethernet controller: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
05:00.0 Network controller: Intel Corporation WiFi Link 5100
Battery: ID-1: BAT0 charge: 31.9 Wh condition: 31.9/53.3 Wh (60%) volts: 11.8/11.1 model: SONY AS07B41
type: Li-ion serial: <filter> status: Full
CPU: Topology: Dual Core model: Intel Core2 Duo T5900 bits: 64 type: MCP arch: Core Merom rev: D
L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 8778
Speed: 2200 MHz min/max: 800/2200 MHz Core speeds (MHz): 1: 2200 2: 1197
Graphics: Device-1: NVIDIA G96M [GeForce 9600M GT] vendor: Acer Incorporated ALI G96CM driver: nouveau v: kernel
bus ID: 01:00.0 chip ID: 10de:0649
Display: tty server: X.org 1.20.4 driver: modesetting unloaded: fbdev,vesa tty: 120x30
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: Intel 82801I HD Audio vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel
bus ID: 00:1b.0 chip ID: 8086:293e
Device-2: Thesycon System & Consulting type: USB driver: snd-usb-audio bus ID: 2-2:6 chip ID: 152a:85dd
Sound Server: ALSA v: k6.1.6-volumio
Network: Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet vendor: Acer Incorporated ALI
driver: ATL1E v: N/A port: 4000 bus ID: 02:00.0 chip ID: 1969:1026
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel WiFi Link 5100 driver: iwlwifi v: kernel port: 4000 bus ID: 05:00.0 chip ID: 8086:4232
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 326.96 GiB used: 1.82 GiB (0.6%)
ID-1: /dev/sda vendor: Seagate model: ST9320320AS size: 298.09 GiB speed: 3.0 Gb/s serial: <filter>
rev: 0303 scheme: MBR
ID-2: /dev/sdb type: USB vendor: Kingston model: DataTraveler 3.0 size: 28.87 GiB speed: 3.0 Gb/s
serial: <filter> rev: 0000 scheme: GPT
Partition: ID-1: / size: 24.55 GiB used: 68.4 MiB (0.3%) fs: overlay source: ERR-102
ID-2: /boot size: 170.8 MiB used: 69.9 MiB (40.9%) fs: vfat dev: /dev/sdb1
Sensors: Missing: Required tool sensors not installed. Check --recommends
Info: Processes: 150 Uptime: 23h 16m Memory: 3.84 GiB used: 1018.7 MiB (25.9%) Init: systemd v: 241 runlevel: 5
default: 2 Compilers: gcc: N/A Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32