ZWang
January 6, 2015, 11:38am
1
Hi there,
My Pi HAT has an IR receiver which uses GPIO #26 . I installed lirc on Volumio 1.51. When I added
irc_rpi gpio_in_pin=26
into the configuration file, dev/lirc0 disappeared.
This issue didn’t happen in Volumio 1.5
Thanks in advance!
Z.
Which Pi are we talking about?
At least the Pi A and B don’t have the GPIO26 available on any Connector (P1, P5). Do you mean pin 26 on P1? This is the SPIO_CE1_N signal or GPIO7 on the BCM2835.
Try configuring LIRC to GPIO7.
BR
Michael
doahn
February 3, 2015, 3:47pm
3
The ir module of the dac i using is connected gpio 26(pin 37) of raspberry pi b+.
And i can’t see /dev/lirc0 .