As the other volspotconnect plugin, this one provides a easy way to use your Volumio device as a Spotify Connect Device.
It is based on librespot, a open source library.
Works on any plateform supported by Volumio
Brutefir Plugin2022-May Deprecated! Do not use with Volumio 3. Use FusionDsp as official DSP plugin
This plugin provides a easy way to install and configure Brutefir ludd.ltu.se/~torger/brutefir.html
With it you can use custom filters to do Digital Room Compensation. (some example filters are included but you have to generate your own with software like Rew and rephase).
This plugin turns on/off a GPIO port depending on the status of volumio. Using AmpSwitch, Volumio can automatically turn an external amplifier on when you press “Play” and turn it off when you press stop/pause. A delay can be specified to avoid premature switching.
Starts playing the last entry in the queue after rebooting volumio.
This is a “must have” for webradios without a modern frontend (http://pin.it/uVFOjQ6).
Notes: This Plugin has been sponsored by JustBoom and its and it works out of the box withJustBoom IR Remote, Odroid Remote and Apple remote. Controls: Play, pause, mute, volume, next, previous, seek, repeat and random
An implementation of SnapCast (server + client) and easy configuration in the plugin settings. Not every option is covered, but the most commonly used are.
Platform: Raspberry Pi; tested on 1 (B and B+), 2 and 3
Note: should work on all armhf devices.
This plugin provides a easy way to backup and restore your device data locally.
Useful before/after re-imaging to new Volumio version, or deploying a setup across multiple devices.
Archived data become available through Volumio’s SMB share, so that it can be copied both ways to preserve and re-deploy.
Please note that sometimes, due to timing issues, the plugin will show as not installed successfully. This is a cosmetic error that I will fix in the near future (it’s actually a bug in Volumio; it uploads the plugin multiple times). <- should be fixed, I will investigate!
Alpha testing was successful, plugins can also be installed.
The first start of the service might take a few seconds, please be patient. Also, the button to open a new tab for the LMS web-interface only works with Volumio 2.296+.
NB: A Squeezelite plugin has been released today (11-09-2017)
Play on connect
This plugin allows to play the queue when a specific IP is detected on your network, and stop the play when this IP disappears.
Very convenient to hear your favorite track when you’ re back home, and to never forget to stop the music when you leave