Volumio 3 Buster Beta for RPi

avjui · September 28, 2021, 3:16pm

With the new Version 3.101 volumio plays no file anymore. It restart all the time.

Try to send log http://logs.volumio.org/volumiobuster/27xPVrp.html

Here last lines from ‘journctl’

!!EDIT: After restore system all works again

Sep 28 17:02:55 livingfoxi systemd[1]: Stopping Music Player Daemon...
Sep 28 17:02:55 livingfoxi systemd[1]: mpd.service: Succeeded.
Sep 28 17:02:55 livingfoxi systemd[1]: Stopped Music Player Daemon.
Sep 28 17:02:55 livingfoxi systemd[1]: Starting Music Player Daemon...
Sep 28 17:02:56 livingfoxi systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver...
Sep 28 17:02:56 livingfoxi systemd[1]: shairport-sync.service: Succeeded.
Sep 28 17:02:56 livingfoxi systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver.
Sep 28 17:02:56 livingfoxi systemd[1]: Started Shairport Sync - AirPlay Audio Receiver.
Sep 28 17:02:57 livingfoxi systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver...
Sep 28 17:02:57 livingfoxi systemd[1]: shairport-sync.service: Succeeded.
Sep 28 17:02:57 livingfoxi systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver.
Sep 28 17:02:57 livingfoxi systemd[1]: Started Shairport Sync - AirPlay Audio Receiver.
Sep 28 17:02:57 livingfoxi mpd[3109]: Sep 28 17:02 : exception: Decoder plugin 'wildmidi' is unavailable: configuration file does not exist: /etc/timidity/timidity.cfg
Sep 28 17:02:58 livingfoxi mpd[3109]: Sep 28 17:02 : exception: Input plugin 'tidal' is unavailable: No Tidal application token configured
Sep 28 17:02:58 livingfoxi mpd[3109]: Sep 28 17:02 : exception: Input plugin 'qobuz' is unavailable: No Qobuz app_id configured
Sep 28 17:02:58 livingfoxi systemd[1]: Started Music Player Daemon.
Sep 28 17:03:06 livingfoxi systemd[1]: Stopping Volumio Streaming Daemon...
Sep 28 17:03:06 livingfoxi systemd[1]: volumio-streaming-daemon.service: Main process exited, code=killed, status=15/TERM
Sep 28 17:03:06 livingfoxi systemd[1]: volumio-streaming-daemon.service: Succeeded.
Sep 28 17:03:06 livingfoxi systemd[1]: Stopped Volumio Streaming Daemon.
Sep 28 17:03:06 livingfoxi systemd[1]: Started Volumio Streaming Daemon.
Sep 28 17:03:06 livingfoxi volumio-streaming-daemon[3144]: ############################
Sep 28 17:03:06 livingfoxi volumio-streaming-daemon[3144]: # Volumio Streaming Daemon #
Sep 28 17:03:06 livingfoxi volumio-streaming-daemon[3144]: # Running on port 7777     #
Sep 28 17:03:06 livingfoxi volumio-streaming-daemon[3144]: ############################
Sep 28 17:03:06 livingfoxi volumio-streaming-daemon[3144]: Environment: production
Sep 28 17:03:08 livingfoxi volumio-streaming-daemon[3144]: Environment: production
Sep 28 17:03:26 livingfoxi systemd-journald[190]: Suppressed 715 messages from volumio.service

rkc · October 1, 2021, 7:56am

cards configuration issue still present in 3.101-2021-09-08-pi.zip version

/volumio/app/plugins/system_controller/i2s_dacs/dacs.json file alsacard parameter not entered for some of the cards. due to this /etc/asound.conf configured with MAX98357A for these cards and alsa error displaying while playing. I hope this will correct in next beta version. I have tested this with Allo Piano 2.1

gkkpch · October 1, 2021, 8:12am

@volumio @mervinio, is this correct?

chsims1 · October 1, 2021, 8:37am

I can confirm this behaviour with a Piano 2.1 on a recent fresh flash to 3.101. ‘outputdevicecardname’ name in /data/configuration/audio_interface/alsa_controller/config.json was fixed at MAXX98357A regardless of which i2s DAC I selected in the UI. Changing the cardname to ‘PianoDACPlus’ was a temporary fix.

eraser1320 · October 1, 2021, 1:56pm

FYI, I also had the issue that nothing would play when upgrading from .83 to .101. After a reset it plays again.

AudioPete · October 10, 2021, 10:30am

Volumio 3.083.
http://logs.volumio.org/volumiobuster/851JLd8.html
Sorry if this has been reported before, but I couldn’t find it.

I am trying and failing to change the Wired IP to fixed. After V’ restarts the network it retains the IP on the screen but does not ‘connect’ and a scan of my network shows that IP is not there.
Also, the wireless connection doesn’t show the correct ‘Player Name’, just Volumio.

gkkpch · October 10, 2021, 3:22pm

Version 3.083 is not supported, you need to update or flash a new version.
Note, you should disable test mode in order not to end up with unsupported test versions.

Volumiobuster-3.101-2021-09-08-pi

AudioPete · October 11, 2021, 9:05am

Thanks, I have done both and it has now correctly registered the fixed IP.

There seems to have been a change to content of cmdline.txt.
The section that was, “console=serial0,115200 kgdboc=serial0,115200”
is now
"console=serial0,115200 console=tty1
Is this because of the change to Buster?
The reason for asking is because I use the UART connection with my PreAmp display.

ashthespy · October 11, 2021, 9:23am

You should still be able to use the UART – what issues are you facing? This was done during the boot debugging for Buster initially (see Adding a Status LED for RP3 B+ - #8 by ashthespy for some details if you are interested)

AudioPete · October 11, 2021, 12:16pm

Thanks Ash.
With Volumio 2.xx I had to remove that section so that the Python code on the PI could communicate with the Pic Controller in my PreAmp. Not my design but from here:
https://www.djuke.nl/en/support/15-preamplifier/44-preamplifier-v2-volumio-integration
I haven’t remade the connection since moving to PI3B and V’ 3.101, I was just thinking ahead.

AudioPete · October 11, 2021, 3:52pm

PI 3B, Volumio 3.101, HiFi Berry DIGI2 Pro.
Sadly failed at stage one, attempting to play an album from my NAS.
http://logs.volumio.org/volumiobuster/1mGq6Ec.html
A popup ALSA error was displayed saying ‘Volumio no such device’. ALSA errors I have seen before have been because the I2S DAC setting had not been registered, but this is a new DIGI board?

AudioPete · October 12, 2021, 8:36pm

Reverting back to Volumio 2.915 to check my hardware.

Lintbf · October 13, 2021, 11:28am

Hi ,

I have buster v 3.111. I see that when playing qobuz playlist the songs are not played in sequential order also if I press next , other song is played form the playlist not the next one .
Anyone experience the same issue ?

Thanks

Vennesch · October 13, 2021, 3:10pm

Is the shuffle icon unchecked?

Lintbf · October 13, 2021, 4:53pm

HI,
That’s very strange , I did not think about this because I have never change it . The color was green , now I press it and it is white and it is ok .

Thanks for hint .

Osdieman · October 14, 2021, 8:40am

Not sure if this is the right place… but i will try anyways…
Today i went for the first time to volumio beta ( version 3.101 ) on raspberry pi 4…
basically all i need to work is working. ( Spotify Connect, Qobuz, Youtube And Snapcast )
I also installed Spotify as normal plugin… installation went fine… login went fine the only thing there is now sound comming out… now i understand there is no support yet for plugins… but maybe someone already tried this and found a solution… if this plugin will also work i would have everything i need from this sytem… So far all is looking good

Kind regards and keep up the good work… Love volumio… ))

volumio · October 14, 2021, 9:42am

Hi Odiesman,
old plugins will not work on Volumio 3.X since a lot has changed in the way we use the audio stack.
You should start from 3.111 and install the plugins which are in the plugins store, those are the ones that are verified to work

loup · October 14, 2021, 12:06pm

Hi, which repository can I download 3.111 from for testing with plugins?

chsims1 · October 14, 2021, 3:43pm

There is a new update available: Volumio 3 Release Candidate 1:

Volumiobuster-3.111-2021-10-08-pi-RC1

The next stage of testing will involve a Volumio 3 Announcement with reported feedback in a new single thread for RPi, Tinkerboard, and x86 .

Thread closed … see you in the new thread.

chsims1 · October 14, 2021, 3:43pm