phubert
November 7, 2016, 12:16pm
1
Hi,
I’m using BubbleUPnP as DLNA client to pilot Volumio on my Raspberry.
My music is stored on a NAS (Townky DLNA server installed)
While playing a track with BubbleUPnP, when I pause/play or stop it, the action is performed 3s after.
I don’t have this problem with the Volumio 1.55 version.
Regards
Pascal
Saiyato
November 7, 2016, 12:42pm
2
Hi Pascal,
The new volumio is incomparable to v1.55. You say raspberry, which version of the Pi are you running on?
Did you try this: volumio-stops-after-half-hour-gives-after-hours-t4640.html ? And how does that affect performance?
Hi Saiyato,
My NAS is not mounted on my Pi so Volumio does not parse it.
It is the BubbleUPnP application (installed on my smartphone) that send the link to play to Volumio with DLNA protocol.
The performance issue I speak about it is the respond time too long (3s) when I pause/play or stop the playback from my smarthphone.
(by comparison, with Volumio 1.55 the respond time is instantaneous)
My setup:
Pi:
2B version.
connected to the LAN
HifiBerry Digit daughterboard >> DAC >> HiFi amplifier >> HiFi speaker
NAS with Twonky DLNA server
BubbleUPnP app on smarthphone
Regards
Pascal
phubert:
Hi Saiyato,
My NAS is not mounted on my Pi so Volumio does not parse it.
It is the BubbleUPnP application (installed on my smartphone) that send the link to play to Volumio with DLNA protocol.
The performance issue I speak about it is the respond time too long (3s) when I pause/play or stop the playback from my smarthphone.
(by comparison, with Volumio 1.55 the respond time is instantaneous)
My setup:
Pi:
2B version.
connected to the LAN
HifiBerry Digit daughterboard >> DAC >> HiFi amplifier >> HiFi speaker
NAS with Twonky DLNA server
BubbleUPnP app on smarthphone
Regards
Pascal
Pascal, this probably depends on the buffer size. Decrease it and you’ll have the same fast loading, but you might encounter music stuttering
Hi Michelangelo,
I decreased the buffer to 128k and 10℅ before play but the problème is still here…
Regards
phubert
December 10, 2016, 3:50pm
6
Does anyone have the same problem…?
I didn’t found solution in the settings to solve this problem.
This is a regression comparativly to the 1.55 version
why dont you use this configuration ?
volumio has its library on the NAS
no need to DLNA server on your NAS, install minidlna on volumio
and pilot Volumio with BublleUpnp
eric
phubert
December 11, 2016, 5:04am
8
Hi Eric,
i dont understand your configuration. Could you precise more please?
Regards
Pascal
1/ volumio withou dlna : does volumio play quite normally without the 3s delay, even when accessing music on your NAS
2/ volumio with DLNA: did you install minidlna on volumio
found in the forum
installing minidlna on volumio 2.0 https://volumio.org/forum/minidlna-volumio-t4829.html
configuring minidlna : https://volumio.org/forum/mini-dlna-t4546.html
not sure it helps
eric