Hi,
Is there a build for a orange pi plus 2e?
Regards
Gesendet von meinem Mi A2 Lite mit Tapatalk
hi
it is possible to get i2s on orange pi zero, but some hardware changes is needed.
forum.armbian.com/topic/6021-or … -zero-i2s/
Is it possible to add i2s option in this volumio?
i tried configure i2s but no success.
gpio 20 is data output, but you have to disable wifi enable in stock and hardware resold this pin .
and what about setup this volumio, when no hdmi, no video is no avaible on this board?
I like to use telnet or uart to control.
A new version Volumio is ready for Orange Pi Lite/Orange Pi PC/Orange Pi One:
>>>
Changelog:
2.555-2019-02-22
Updated to armbian kernel 4.19.21.
On orange pi zero also data input is avaible?
Could you confirm gpio 2 as output or if have you pinout of i2s line?
hello
4.14.47-sunxi #20 SMP Thu May 31 18:25:34 NZST 2018 armv7l
on one port i see only BCK, but no W/S no DATA on rest port.
BCK is ok, i see it start when play.
Orange pi zero.
Could some test volumio on this board?
root@aux-volvo:/etc# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: I2Smaster [I2S-master], device 0: 1c22000.i2s-pcm5102a-hifi pcm5102a-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
I changed pio20 (resolder) but nothing on this pin.
could someone help with configure gpio20 as output and w/s pin?
Regards
i have version 1.4.
this is where i see w/s and clock signals on pins.
ws
clk
but no data out.
I found possibility to change pa20 (used to enable wifi) to other pin, but in volumio it is not work.
Could someone who has this board to check, how to enable data out from h2?
It will be need to recompile kernel, but i do not have any tool-chain for that and no experiences.
hackaday.io/project/162373-oran … sic-server
So, who wants to help with this?
Ok, no needed to change anything, data out working without this voltage chip.
Next question, is it possible to change i2s format? Justified to left or right?
Wysłane z mojego SM-G950F przy użyciu Tapatalka
Hi
Anyone know something?
If it no possible, i eill try some other sollution.
Btw…
In volumio should be setup of auto play of usb devive and some simply way to play content without screen…
Now, playing some files from attached usb is horrible, i have to go to menu, add files to playlist etc…
It should be simple…
Wysłane z mojego SM-G950F przy użyciu Tapatalka
This one is gold, I have Orange Pi PC and could not send audio output to 3.5mm jack, I tried everything - setting up overlays, changing setting… nothing worked, but this image Worked!
works like a charm great job!
It is made to work with the DAC. You can buy it for $5 and connect without problems.
And I do not have a Orange Pi PC board that would test the sound through the 3.5 Jack, I use Orange Pi Lite, no problem.
The new version Volumio 2.565 (Orange Pi Lite, Orange Pi PC, Orange Pi One):
>>>link
Changelog link.
Is it possible to add choice dac board?
Any dac need some special setup of i2s bus, if is no possibility to change i2s format, maybe you can add dac board to select?
Wysłane z mojego SM-G950F przy użyciu Tapatalka
This would require quite a lot of effort.
The porting responsible would have to enable kernel device tree overlay support, change the (u)boot procedure using a boot configuration mechanism to insert the overlays, using device tree overlays for each DAC.
Though we would need more than a handful users, the Volumio team would be open to customize the i2s configuration, but I don’t think you will find support for the overlay part.
It will be great to open i2s configuration.
Now it is hard to implement it (connect other dac as recomended…).
Only justified will be great.
Wysłane z mojego SM-G950F przy użyciu Tapatalka
Hi, I’m using the orange pi lite version of Volumio 2.565 (Orange Pi Lite, Orange Pi PC, Orange Pi One) DAC PCM1502a
ru.aliexpress.com/item/PCM5102A … 33edpfSewz
connection
DAC OPI PIN
Vcc 5v 2
3.3v 3.3v 1
GND gnd 39
Flt gnd 14
DMP gnd 20
SCL SCL 5
BCK BCK 12
DIN Data 40
LCK LCK 35
FMT gnd 30
XMT 3.3v 17
NO SOUND
also on OPI PC
what am I doing wrong?
on RPI DAC works
Looks like you have connected it up for the raspberry pi pinout. Adjust it for the OrangePi lite pinout - linux-sunxi.org/Xunlong_Orange_Pi_One_%26_Lite
Tonight, after work, I’ll post here how to connect Orange Pi lite with DAC PCM1502a.
For PCM5102 DAC:
aliexpress.com/item/PCM5102-DAC … 23432.html
I hope the photo is clear:
[spoiler]
The blue wire is a jumper.
[/spoiler]
Hi works with this connection
DAC OPI PIN
Vcc 5v 2
3.3v 3.3v 1
GND gnd 39
FLT gnd 14
DMP gnd 20
SCL SCL 6
BCK BCK 27
DIN Data 37
LCK LCK 28
FMT gnd 30
XMT 3.3v 17 10kOm
ru.aliexpress.com/item/PCM5102A … 33edpfSewz
[spoiler]
[/spoiler]
Hi guys! What about Orange pi zero (H2+)? Last image of Volumio is Volumio-2.406-2018-05-31-orangepizero.img. There is no MyVolumio with this old image!
I need your help!
Victor