yes, this is a DAC with generic Thesycon firmware and is supported on modern kernels.
However, bad news, while checking I just noticed, that the C1 usb audio driver offers no DSD direct support at all and it cannot be patched either. The kernel is way too old, DoP is all you can have.
This also makes your log obsolete, I’m sorry
After reflashing the sdcard and changing HDD on NAS the music library is imported much faster but i have a big issue.
I’m now suffering of unresponsiveness of the system and mpd crashing during music library import.
Basically imports works flawlessly till around 620 tracks (i believe its the total) and then the system become super unresponsive and kswap0 kicks in (i guess killing cifs and mpd process).
top - 08:46:10 up 4 min, 1 user, load average: 1.40, 0.97, 0.43
Tasks: 145 total, 2 running, 143 sleeping, 0 stopped, 0 zombie
%Cpu(s): 23.1 us, 5.9 sy, 0.0 ni, 70.6 id, 0.4 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 823568 total, 712368 used, 111200 free, 1840 buffers
KiB Swap: 0 total, 0 used, 0 free. 35388 cached Mem
533 mpd 20 0 593988 435656 5480 S 100.3 52.9 1:12.24 mpd
44 root 20 0 0 0 0 S 9.6 0.0 0:00.54 kswapd0
1113 shairpo+ 20 0 90956 2048 1224 S 1.0 0.2 0:02.98 shairport-sync
1417 root 20 0 2992 960 588 R 1.0 0.1 0:01.07 top
14 root 20 0 0 0 0 S 0.7 0.0 0:07.24 ksoftirqd/1
67 root 20 0 0 0 0 S 0.3 0.0 0:00.23 kthread_di
895 volumio 20 0 200952 69332 14312 S 0.3 8.4 0:28.44 node
1110 volumio 20 0 109260 2968 1988 S 0.3 0.4 0:00.64 upmpdcli
1 root 20 0 5340 2264 628 S 0.0 0.3 0:06.50 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.08 ksoftirqd/0
4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
6 root 20 0 0 0 0 S 0.0 0.0 0:00.06 kworker/u8:0
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:00.12 rcu_preempt
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
11 root rt 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
12 root rt 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
top - 08:26:00 up 9 min, 3 users, load average: 13.27, 7.04, 2.96
Tasks: 153 total, 2 running, 151 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.1 us, 12.1 sy, 0.0 ni, 33.3 id, 54.6 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 823568 total, 717576 used, 105992 free, 320 buffers
KiB Swap: 0 total, 0 used, 0 free. 11620 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
44 root 20 0 0 0 0 S 13.0 0.0 0:32.60 kswapd0
76 root -51 0 0 0 0 S 5.5 0.0 0:13.86 irq/110-sdhc
133 root 0 -20 0 0 0 D 4.5 0.0 0:11.05 loop0
1236 volumio 20 0 10628 1240 544 D 3.1 0.2 0:07.34 sshd
520 root 20 0 3104 704 464 D 2.6 0.1 0:01.16 systemd-logind
1 root 20 0 5400 2180 532 D 2.4 0.3 0:11.85 systemd
905 volumio 20 0 200964 56260 1004 D 2.4 6.8 0:33.07 node
2012 root 20 0 30512 1824 116 D 2.3 0.2 0:00.32 smbd
499 volumio 20 0 29772 1032 336 S 2.1 0.1 0:05.39 volumio-remote-
898 root 20 0 18248 1492 304 D 1.9 0.2 0:05.49 nmbd
77 root 20 0 0 0 0 S 1.8 0.0 0:04.49 mmcqd/0
501 root 20 0 2344 504 348 D 1.8 0.1 0:04.85 volumiologrotat
1111 volumio 20 0 101064 1504 508 D 1.3 0.2 0:03.75 upmpdcli
662 ntp 20 0 20120 1888 456 S 0.8 0.2 0:04.06 ntpd
933 root 20 0 30512 2300 592 S 0.7 0.3 0:01.11 smbd
938 root 20 0 30512 2024 316 D 0.7 0.2 0:00.72 smbd
552 avahi 20 0 4636 752 424 S 0.6 0.1 0:00.98 avahi-daemon
1154 volumio 20 0 851216 1684 264 S 0.5 0.2 0:00.71 streaming-daemo
190 root 20 0 0 0 0 S 0.3 0.0 0:01.51 kworker/0:2
120 root 0 -20 0 0 0 S 0.2 0.0 0:00.22 kworker/1:1H
490 root 20 0 7168 3452 396 S 0.2 0.4 0:03.10 haveged
Could this be related to the low RAM available?
I tried volumio@volumio:~$ sudo echo 1 > /proc/sys/vm/drop_caches but nothing changed
Unfortunately when it freezes i can’t send the logs anymore but still journalctl -f has nothing relevant inside.
About the old kernel, have you ever look into this ?
https://armbian.hosthatch.com/dl/_old/odroidc1/
it seems it is based on kernel 5.10
Yes, I know Armbian very well and the great work they do to the community.
However, Armbian dropped regular support for the C1/C1+ a long time ago.
They have started something experimental, it it is without any i2s audio component because mainline support for s805 is very limited. It does not support eMMC, no usb hot-plugging etc.
For us this is useless as a reference.
So, please accept that there will be no more 3.10.y kernel updates, neither from Hardkernel, from Armbian or from us.
I have no intention to invest time to figure out if there is an alternative way to get DSD support to the C1 kernel. As said before, DoP is all you can have.
I’m really sorry, but it is the way it is
I got your point, still i use no i2s audio, i use USB DAC which is always plugged in (hot-plugging not needed) and i do have an SDCard so i just felt it could have been useful.
Can you help me out with the issue i’m facing above?
I have the image running here on 2 old C1+ boards and do not experience any problems with a NAS library and approx. 12’000 tracks.
Not with this image or any of the previous.
Looks a bit like power issues, can you check without the usb dac or any other peripherals connected?
I was able to catch the dmesg
[ 49.650131] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x77
[ 49.659020] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x77
[ 49.667982] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x77
[ 156.544307] _hcd_isoc_complete:Uknown urb status -2
[ 304.568678] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983200 status=-104
[ 304.575219] _hcd_isoc_complete:Uknown urb status -2
[ 304.575240] _hcd_isoc_complete:Uknown urb status -2
[ 309.344706] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983000 status=-104
[ 309.351411] _hcd_isoc_complete:Uknown urb status -2
[ 315.357188] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983100 status=-104
[ 315.364088] _hcd_isoc_complete:Uknown urb status -2
[ 319.800116] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
[ 319.807306] _hcd_isoc_complete:Uknown urb status -2
[ 323.089087] [aml_sdhc_data_thread] SDHC_ESTA=0x0
[ 323.392955] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
[ 323.398889] _hcd_isoc_complete:Uknown urb status -2
[ 323.398905] _hcd_isoc_complete:Uknown urb status -2
[ 327.556436] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
[ 327.564073] _hcd_isoc_complete:Uknown urb status -2
[ 330.113873] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983200 status=-104
[ 330.121720] _hcd_isoc_complete:Uknown urb status -2
[ 331.575877] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983200 status=-104
[ 331.584010] _hcd_isoc_complete:Uknown urb status -2
[ 337.570615] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983300 status=-104
[ 337.578828] _hcd_isoc_complete:Uknown urb status -2
[ 341.159559] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
[ 341.167998] _hcd_isoc_complete:Uknown urb status -2
[ 344.310022] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983200 status=-104
[ 344.318762] _hcd_isoc_complete:Uknown urb status -2
[ 350.589448] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983200 status=-104
[ 350.598244] _hcd_isoc_complete:Uknown urb status -2
[ 355.558647] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
[ 355.567628] _hcd_isoc_complete:Uknown urb status -2
[ 359.290764] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983b00 status=-104
[ 359.299953] _hcd_isoc_complete:Uknown urb status -2
[ 365.118953] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
[ 365.128363] _hcd_isoc_complete:Uknown urb status -2
[ 369.527972] update invoked oom-killer: gfp_mask=0x200da, order=0, oom_score_adj=0
[ 369.532953] update cpuset=/ mems_allowed=0
[ 369.538190] CPU: 3 PID: 1187 Comm: update Not tainted 3.10.104 #10
[ 369.543669] [<c0014eb4>] (unwind_backtrace+0x0/0xec) from [<c0011ea8>] (show_stack+0x10/0x14)
[ 369.552243] [<c0011ea8>] (show_stack+0x10/0x14) from [<c066a78c>] (dump_header+0x80/0x1bc)
[ 369.560714] [<c066a78c>] (dump_header+0x80/0x1bc) from [<c00b068c>] (oom_kill_process+0x74/0x3a4)
[ 369.569759] [<c00b068c>] (oom_kill_process+0x74/0x3a4) from [<c00b0e2c>] (out_of_memory+0x2a8/0x2fc)
[ 369.579066] [<c00b0e2c>] (out_of_memory+0x2a8/0x2fc) from [<c00b4f44>] (__alloc_pages_nodemask+0x858/0xa18)
[ 369.588932] [<c00b4f44>] (__alloc_pages_nodemask+0x858/0xa18) from [<c00cdc10>] (handle_pte_fault+0x180/0x910)
[ 369.599080] [<c00cdc10>] (handle_pte_fault+0x180/0x910) from [<c00ce4d4>] (handle_mm_fault+0x134/0x1e0)
[ 369.608651] [<c00ce4d4>] (handle_mm_fault+0x134/0x1e0) from [<c0019e0c>] (do_page_fault+0x118/0x3c8)
[ 369.617900] [<c0019e0c>] (do_page_fault+0x118/0x3c8) from [<c0008328>] (do_DataAbort+0x38/0x98)
[ 369.626792] [<c0008328>] (do_DataAbort+0x38/0x98) from [<c000dd34>] (__dabt_usr+0x34/0x40)
[ 369.635166] Exception stack(0xda9dbfb0 to 0xda9dbff8)
[ 369.640399] bfa0: 91ff2ff8 b3c87774 00001001 91ff2ff0
[ 369.648720] bfc0: ae100010 00000015 00000010 91ff2ff0 fff00000 000f4000 91f00000 91f00000
[ 369.657075] bfe0: 91ff3000 aea661d8 b3bb8ed4 b3bb8b5c 800d0010 ffffffff
[ 369.663845] Mem-info:
[ 369.667634] Normal per-cpu:
[ 369.671404] CPU 0: hi: 186, btch: 31 usd: 99
[ 369.675313] CPU 1: hi: 186, btch: 31 usd: 73
[ 369.679472] CPU 2: hi: 186, btch: 31 usd: 103
[ 369.684483] CPU 3: hi: 186, btch: 31 usd: 0
[ 369.689386] HighMem per-cpu:
[ 369.693287] CPU 0: hi: 90, btch: 15 usd: 39
[ 369.697360] CPU 1: hi: 90, btch: 15 usd: 14
[ 369.702318] CPU 2: hi: 90, btch: 15 usd: 15
[ 369.707317] CPU 3: hi: 90, btch: 15 usd: 49
[ 369.712226] active_anon:166047 inactive_anon:1133 isolated_anon:0
active_file:1396 inactive_file:6667 isolated_file:0
unevictable:0 dirty:0 writeback:0 unstable:0
free:2460 slab_reclaimable:2067 slab_unreclaimable:4842
mapped:1769 shmem:1484 pagetables:1038 bounce:0
free_cma:1232
[ 369.763625] Normal free:9676kB min:2980kB low:3724kB high:4468kB active_anon:462132kB inactive_anon:156kB active_file:2976kB inactive_file:24028kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:628736kB managed:555928kB mlocked:0kB dirty:0kB writeback:0kB mapped:2276kB shmem:200kB slab_reclaimable:8268kB slab_unreclaimable:19368kB kernel_stack:1736kB pagetables:4152kB unstable:0kB bounce:0kB free_cma:4928kB writeback_tmp:0kB pages_scanned:42327 all_unreclaimable? yes
[ 369.814223] lowmem_reserve[]: 0 1704 1704
[ 369.822756] HighMem free:164kB min:212kB low:504kB high:796kB active_anon:202056kB inactive_anon:4376kB active_file:2608kB inactive_file:2640kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:218112kB managed:218112kB mlocked:0kB dirty:0kB writeback:0kB mapped:4800kB shmem:5736kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:118984kB free_cma:0kB writeback_tmp:0kB pages_scanned:15258 all_unreclaimable? yes
[ 369.868756] lowmem_reserve[]: 0 0 0
[ 369.877233] Normal: 1543*4kB (UEC) 2*8kB (R) 1*16kB (R) 0*32kB 1*64kB (R) 0*128kB 1*256kB (R) 0*512kB 1*1024kB (R) 1*2048kB (R) 0*4096kB = 9596kB
[ 369.889788] HighMem: 5*4kB (UM) 3*8kB (UM) 2*16kB (UR) 3*32kB (UM) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 172kB
[ 369.902010] 9638 total pagecache pages
[ 369.907382] 0 pages in swap cache
[ 369.912779] Swap cache stats: add 0, delete 0, find 0/0
[ 369.918201] Free swap = 0kB
[ 369.923629] Total swap = 0kB
[ 369.939708] 211712 pages of RAM
[ 369.945246] 4666 free pages
[ 369.950709] 5820 reserved pages
[ 369.956182] 4977 slab pages
[ 369.961666] 1044197 pages shared
[ 369.967223] 0 pages swap cached
[ 369.972756] [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name
[ 369.980735] [ 197] 0 197 1869 566 6 0 0 systemd-journal
[ 369.989699] [ 216] 0 216 2602 175 6 0 -1000 systemd-udevd
[ 369.998542] [ 443] 0 443 921 121 4 0 0 rpcbind
[ 370.006902] [ 453] 103 453 972 153 5 0 0 rpc.statd
[ 370.015403] [ 467] 0 467 594 40 4 0 0 rpc.idmapd
[ 370.024028] [ 469] 0 469 1792 801 6 0 0 haveged
[ 370.032366] [ 473] 1000 473 1634 144 5 0 0 udisks-glue
[ 370.041144] [ 477] 1000 477 7443 224 10 0 0 volumio-remote-
[ 370.050259] [ 478] 0 478 586 139 4 0 0 volumiologrotat
[ 370.059414] [ 491] 0 491 776 110 4 0 0 systemd-logind
[ 370.068509] [ 508] 104 508 1159 173 5 0 0 avahi-daemon
[ 370.077410] [ 509] 110 509 181568 133884 326 0 0 mpd
[ 370.085568] [ 511] 102 511 1272 182 5 0 -900 dbus-daemon
[ 370.094474] [ 561] 65534 561 451 28 3 0 0 thd
[ 370.102861] [ 573] 0 573 354 67 3 0 0 ifplugd
[ 370.112729] [ 614] 104 614 1131 66 5 0 0 avahi-daemon
[ 370.121932] [ 642] 100 642 5030 415 12 0 0 ntpd
[ 370.130284] [ 680] 0 680 1639 181 5 0 -1000 sshd
[ 370.138624] [ 683] 0 683 4091 199 7 0 0 udisks-daemon
[ 370.147780] [ 704] 0 704 1749 78 6 0 0 udisks-daemon
[ 370.156955] [ 720] 0 720 8686 182 11 0 0 polkitd
[ 370.165610] [ 798] 0 798 4563 445 11 0 0 nmbd
[ 370.174011] [ 799] 0 799 4419 288 10 0 0 nmbd
[ 370.182406] [ 800] 0 800 5834 397 13 0 0 winbindd
[ 370.191187] [ 802] 0 802 5831 467 13 0 0 winbindd
[ 370.199973] [ 805] 0 805 422 45 3 0 0 dhcpcd
[ 370.208598] [ 810] 1000 810 50207 14206 128 0 0 node
[ 370.217073] [ 838] 0 838 919 53 4 0 0 agetty
[ 370.225745] [ 839] 0 839 452 66 4 0 0 agetty
[ 370.234424] [ 910] 0 910 7630 524 17 0 0 smbd
[ 370.242953] [ 913] 0 913 5834 411 13 0 0 winbindd
[ 370.251824] [ 914] 0 914 5834 391 12 0 0 winbindd
[ 370.260715] [ 915] 0 915 7630 450 16 0 0 smbd
[ 370.269275] [ 929] 0 929 2657 254 7 0 0 sshd
[ 370.277910] [ 979] 1000 979 1134 179 4 0 0 systemd
[ 370.286797] [ 980] 1000 980 1641 420 5 0 0 (sd-pam)
[ 370.295787] [ 982] 1000 982 2690 210 6 0 0 sshd
[ 370.304423] [ 983] 1000 983 1147 195 4 0 0 bash
[ 370.313067] [ 988] 1000 988 18111 2035 43 0 0 node
[ 370.321703] [ 997] 1000 997 28717 3686 64 0 0 node
[ 370.330366] [ 1002] 1000 1002 28795 3667 63 0 0 node
[ 370.339047] [ 1003] 1000 1003 28740 3748 65 0 0 node
[ 370.347729] [ 1086] 1000 1086 27315 249 21 0 0 upmpdcli
[ 370.356784] [ 1087] 999 1087 22739 232 19 0 0 shairport-sync
[ 370.366385] [ 1129] 1000 1129 212628 529 15 0 0 streaming-daemo
[ 370.377091] [ 1516] 0 1516 2657 254 7 0 0 sshd
[ 370.386816] [ 1541] 1000 1541 2657 194 6 0 0 sshd
[ 370.396542] [ 1542] 1000 1542 1146 91 5 0 0 bash
[ 370.406148] [ 1558] 1000 1558 2148 174 8 0 0 journalctl
[ 370.416237] [ 1795] 0 1795 586 107 3 0 0 volumiologrotat
[ 370.426789] [ 1796] 0 1796 651 190 4 0 0 ls
[ 370.436158] [ 1797] 0 1797 342 59 3 0 0 cut
[ 370.445569] Out of memory: Kill process 509 (mpd) score 651 or sacrifice child
[ 370.454451] Killed process 509 (mpd) total-vm:726272kB, anon-rss:535296kB, file-rss:236kB
[ 370.836433] _hcd_isoc_complete:Uknown urb status -2
it seems like it is indeed a memory issue (i have 1.5Gb files in my library btw)
When this starts
[ 315.364088] _hcd_isoc_complete:Uknown urb status -2
[ 319.800116] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = da983e00 status=-104
the audio start to stutters probably due to resoruces, the question is why mpd goes so high in memory consumption
So i start to understand what’s the issue here
Previously i’ve installed the following mpd
to make volumio-ytcr work better (and apparently no issues were present aside from the scanning).
So what i did was reflash the official image and start the library scan.
It turned out that after 30min the library scanned only 15 songs.
With this new mpd the library scan went so much faster (60 albums in like 5s) but it always ends up eating too much memory and crash at the end.
I’ve also noticed that if i turn off via volumio ui half-way the scan, it always restarts from zero.
Unfortunately i can say for sure that the old version would end up completing the scan properly.
For the time and effort spent on getting stuff to work well with this board, perhaps it is better to move to a different board that is known to work. This is even more so when Volumio Buster is released, as you can be sure that it won’t appear on Odroid C1 (Edit: my mistake).
The fact is, the 3.10.x kernel for the Odroid C1 is old and buggy. Mainline kernel has limited support and I don’t think further development will be made on the S805 SoC.
There is a reason why Raspberry Pis lead the crowd in terms of popularity. With my old Pi 3B, at least I know I’d still be able to run the latest kernel on it.
Your assumption? Wrong.
Get your info first before making up stories
C0/C1/C1+
Volumiobuster-3.066-2021-04-16-odroidc1
Ahh… I stand corrected.
So what kernel version is it running?
when you scroll up a few posts you will see which one and why
@itsmaxdd , why not try Buster beta then? There will be no need to upgrade MPD and you can see if the scan works.
judging by the date of release it might be that plugin manager (or pluings) is not working properly.
I read they fixed it in later stages but i might be wrong.
@gkkpch can you suggest on this?
They purposefully disabled plugins for the beta. You can still install volumio-ytcr through ssh like you did with 2.x
But before installing any plugin, test whether scanning works as it should.
sorry, please read info on Volumio 3 beta, it was clearly communicated that it is without plugins and users are not supposed to install manually. Do NOT ask for support when you did.
That said, the next version will be a rc1 with support for the new plugin store.
Note, Odroid betas are ‘preview’, focus is on RPi, Tinkerboard and x86.
So when rc1 is announced, it will still take time before I can build the community portings.
This goes without saying~
@gkkpch can you forsee a beta release date for odroid c1 perhaps?
while what you are saying make sense i still think that you might be interested in some testers so i could as well make a try for the science
I understand and appreciate the test help you’re offering, but this is not a fulltime job for me and currently more priority is given to getting the x86 rc1 tested and released.
A little Off Topic, but I realised we made this for some other issue today – should give you an overview
Device | Base | Arch | VOLUMIO_HARDWARE |
VOLUMIO_DEVICENAME |
Kernel | Type | Status |
---|---|---|---|---|---|---|---|
cuboxp | armv7 | armhf | cuboxp | Cubox Pulse | 4.14.y | C | P |
kvim1 | armv7 | armhf | kvim1 | Khadas VIM1 | 4.9.y | C | P |
kvim2 | armv7 | armhf | kvim2 | Khadas VIM2 | 4.9.y | C | P |
kvim3 | armv7 | armhf | kvim3 | Khadas VIM3 | 4.9.y | C | P |
nanopineo2 | armv7 | arm64 | nanopineo2 | NanoPi Neo2 | 4.11.y | C, O | P |
nanopineo3 | armv7 | armhf | nanopineo3 | Nanopi Neo3 | 5.4.y | C, O | T |
odroidc1 | armv7 | armhf | odroidc1 | Odroid-C1 | 3.10.y | C | P |
odroidc2 | armv7 | armhf | odroidc2 | Odroid-C2 | 3.16.y | C | P |
odroidc4 | armv7 | armhf | odroidc4 | Odroid-C4 | 4.9.y | C | P |
odroidn2 | armv7 | armhf | odroidn2 | Odroid-N2 | 4.9.y | C | P |
odroidxu4 | armv7 | armhf | odroidxu4 | Odroid-XU4 | 4.9.y | C | P |
orangepilite | armv7 | armhf | orangepilite | Orange Pi | 5.4.y | C | T |
pine64base | armv7 | armhf | pine64 | Pine64 | 5.7.y | C | P |
pine64plus | armv7 | armhf | pine64plus | Pine64+ | 5.7.y | C | P |
pine64solts | armv7 | armhf | pine64solts | soPine64-Pine64LTS | 5.7.y | C | P |
pi | arm | armhf | pi | Raspberry Pi | 5.4.y | S | T |
rockpis | armv7 | armhf | rockpis | ROCK Pi S | 5.6.y | C | P |
rock64 | armv7 | armhf | rock64 | ROCK64 | 4.4.y | C | P |
tinkerboard | armv7 | armhf | tinkerboard | Asus Tinkerboard | 4.4.y | S | P |
vszero | armv7 | armhf | vszero | Voltastream Zero | 4.1.y | C | P |
x86_amd64 | x64 | amd64 | x86_amd64 | x86_64 | 5.10.y | S | T |
x86_i386 | x86 | i386 | x86_i386 | x86 | 5.10.y | S | T |
Do note that this is an evolving list, things change!
Thanks ash~
As Volumio 3 is available for all Odroid devices, I’ll close this topic soon.