Name: S.M.S.L Sanskrit 10th MK II
Receiver: XMOS (gen2?)
DAC: AKM AK4493 DAC
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: Volumio 2.834, RPi 4b 2Gb
Hardware Mixer on Volumio: Yes
HW Mixer string: N/A
Comments:
Cant play DSD when connected to volumio rpi (direct mode), but i can over my PC and DAC shows it.
HW mixer is enabled and working, but im not 100% sure what should happen exactly because i see change in alsamixer. Anyhow, i can change volume lvl, so its ok for me.
Name: TeraDac TeraLink x2 Receiver: Tenor Te7022 DAC: Async: No Working with Volumio: Yes Tested Versions and Platforms: Raspberry pi 3, Volumio 2.8 Harware Mixer on Volumio: No HW Mixer string: Comments: Plug and play Buying Link:
Name: TeraDak V4.5 Chameleon Receiver: Tenor TE7022L DAC: TDA1543 (16x in parallel) Async: no Working with Volumio: yes Tested Versions and Platforms: all Hardware Mixer on Volumio: no Comments: also TeraDak V2.6 and V4.1
Name: Edifier S880DB
Receiver: Active speaker with USB DAC
DAC: XMOS U11690C20 (xCore 200 XU216)
Async: Capable of Async Playback YES
Working with Volumio: YES
Tested Versions and Platforms: Working on PI
Harware Mixer on Volumio: YES
HW Mixer string: -
Comments: Plug and play. Hi-Res audio certified, direct play up to 192KHz 24bit. Works well with Spotify connect (even remote control’s next/previous button works!).
Buying Link: various stores
Name: Schiit Modi 3+
Receiver: (Amp?) Dayton APA150
DAC:
Async:
Working with Volumio: YES
Tested Versions and Platforms: RPI 4
Harware Mixer on Volumio: Not that I’ve seen?
HW Mixer string:
Comments: No issues so far. Popped right up in the sources list
Buying Link: https://www.schiit.com/products/modi-1
Name: Fiio M6 Receiver: Exynos DAC: Sabre ES9018Q2C Async: ? Working with Volumio: YES Tested Versions and Platforms: x86/2.861 Harware Mixer on Volumio: NO HW Mixer string: - Comments: In “DSD direct mode” converts to PCM192/24. Buying Link: -
Name: WaveIO + DDDAC1543 + Raspberry Pi 4 4GB streamer
Receiver: WaveIO
DAC: DDAC1543 / (8x) TDA1543
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: Raspberry Pi 4
Harware Mixer on Volumio: YES
HW Mixer string: Look for hw mixer name on /etc/mpd.conf . Report this ONLY if you had to make manual adjustment to make it work.
Comments: USB Receiver defaults to 44.1kHz, though the player reports varied and specific data on the stream. Support for specific controls over sampling etc. on the USB receiver end would be greatly appreciated, especially as it comes to Tidal/MQA.
Buying Link: Home (USB receiver. DDDAC is no longer available in the version I have it (1543).
Name: T+A HA 200 (DAC+Headphone Amplifier) Receiver: Proprietary T+A (based on STM32H743) DAC: PCM:4xPCM1795, DSD: proprietary T+A “True 1-Bit DAC” Async: Yes Working with Volumio: Yes Tested Versions and Platforms: PI Harware Mixer on Volumio: No HW Mixer string: Comments: Tested up tp PCM768 and DSD512. DSD1024 might work, but could not be tested (due to lack of DSD1024 test file). Buying Link:Headphone Amplifier
Name:Edifier A300 Pro Receiver: built-in USB port DAC: TLV320AIC3268 Async: Working with Volumio: YES Tested Versions and Platforms: 2020Jan image on Rpi4B Harware Mixer on Volumio: HW Mixer string: Comments: Buying Link: Airpulse A300PRO - Edifier USA
Name: Loxjie D30
Receiver: USB Receiver
DAC: AK4493
Async: Capable of Async Playback (YES\NO)
Working with Volumio: YES
Tested Versions and Platforms: Working on PI or other platforms, with version name (most of times will be ALL or NONE): Rapsi 4 tested OK - Volumio 2.861
Harware Mixer on Volumio: YES
HW Mixer string: Look for hw mixer name on /etc/mpd.conf . Report this ONLY if you had to make manual adjustment to make it work.
Comments: Worked out of the box
Buying Link:
Name: SMSL M200 Receiver: XMOS XU208 DAC: AKM AK4497EQ Async: YES Working with Volumio: YES Tested Versions and Platforms: 2.861 on PC(Asrock-J4105-itx) Harware Mixer on Volumio: YES HW Mixer string: N/A Comments: The M200 works with volumio only in PCM mode. When Direct_DSD is enabled, the DSF file is converted on the fly to PCM176 or PCM705. Buying Link:S.M.S.L Audio Official -双木三林官网
Name: Matrix Audio Element H -> Minidsp SHD Studio -> Hegel H390
Amp: Hegel H390
DAC: Hegel H390
Async: Yes
Working with Volumio: YES
Tested Versions and Platforms: x86 - Volumio 2.873
Hardware Mixer on Volumio: n/a
HW Mixer string: N/A
Comments: The x86 player uses the Element H USB interface card, which is connected to the Minidsp SHD, which in term is connected to the DAC of the Hegel H390.
Info Link:
Name: TEAC UD-503 USB DAC
Receiver: N/A
DAC: N/A
Async: Capable of Async Playback : Not stable
Working with Volumio: YES but Not stable
Tested Versions and Platforms: Mini PC flash Volumio Ver 2.873
Harware Mixer on Volumio: N/A
HW Mixer string: N/A
Comments: Very often error does not play music, cannot find devices, cannot run DSD native, can only run DSD on DOP and is also unstable. Teac UD-503 supports DSD up to 256 but Volumio only plays up to 128 …
Name: Topping MX3 Receiver: Savitech SA9023A DAC: TI PCM5102A Async: Unsure (Isochronous adaptive) Working with Volumio: YES* Tested Versions and Platforms: Raspberry Pi 4B 2GB rev 1.4, Volumio 2.873 Harware Mixer on Volumio: YES HW Mixer string: N/A Comments: *Only works with a USB A hub in between the Pi and the DAC. The hub does not need to be separately powered. Without the hub it has connectivity issues and will not function properly. (It might only be my specific Pi or my specific MX3 that does this). I am using a UGREEN 4 port USB 3.0 hub.
Name: EarMen Donald DAC Receiver: XMOS 200 DAC: Cirrus Logic CS43198 Async: Unsure Working with Volumio: YES Tested Versions and Platforms: Raspberry Pi 4B, Volumio 2.861 Harware Mixer on Volumio: No HW Mixer string: N/A Comments: tested up to DSD256; Donald DAC is supposed to unfold MQA, but I don’t think MQA works with Volumio Buying Link:https://earmen-shop.com/