USB DAC compatibility List

Name: Audiolab M-DAC+ (“plus”)
Receiver: ?
DAC: ESS Sabre32 9018
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: 2.806 with RPi3B+ & RPi4
Hardware Mixer on Volumio: No
HW Mixer string:
Comments: M-DAC+ remote successfully controls playback in Volumio over USB, but not volume
Buying Link:

Name: PS Audio Stellar Gain Cell DAC
Receiver: USB, I2S over HDMI
DAC: ESS Sabre Hyperstream
Async: YES
Working with Volumio: USB - Not working for Stellar CPU 1.3.2.2 / FPGA 1.04. It worked fine for a previous release. It works fine with Stellar CPU 1.3.3.3 / FPGA 1.04.
I2S - with Audio-GD module on RPI3+ GPIO works fine (and sounds better)
Tested Versions and Platforms: 2.806 with RPi3B+
Hardware Mixer on Volumio: No
HW Mixer string:
Comments: Stellar CPU 1.3.2.2 / FPGA 1.04 - Linux driver issues, DAC works fine under Windows. Stellar CPU 1.3.3.3 - Works fine on Windows and Linux
Buying Link:

1 Like

Name: NAD D 3045 hybrid digital amplifier
Receiver: USB Receiver
DAC: AKM AK4490 chipset
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: running on Allo USBridge Signature (used with 2.699, 2.799 and 2.834)
Harware Mixer on Volumio: NO
HW Mixer string:
Comments: USBridgeSig is connected to the NAD via USB. After a Volumio OTA update you need to re-install the Allo USBridge Signature asix Ethernet v2.0 driver (http://3.230.113.73:9011/Allocom/asix2v0/).
Buying Link:

1 Like

Name: Schiit Modius DAC
Receiver: Schiit Unison USB™
DAC: AKM AK4493
Async: unknown
Working with Volumio: YES
Tested Versions and Platforms: Volumio version 2.806 on Raspberry Pi 4+, 4GB
Harware Mixer on Volumio: YES
HW Mixer string:
Comments: Issues, remarks or important info
Buying Link:

Name: S.M.S.L Sanskrit 10th MK II
Receiver: XMOS (gen2?)
DAC: AKM AK4493 DAC
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: Volumio 2.834, RPi 4b 2Gb
Hardware Mixer on Volumio: Yes
HW Mixer string: N/A
Comments:

Cant play DSD when connected to volumio rpi (direct mode), but i can over my PC and DAC shows it.
HW mixer is enabled and working, but im not 100% sure what should happen exactly because i see change in alsamixer. Anyhow, i can change volume lvl, so its ok for me.

Buying Link: amazon

Name: TeraDac TeraLink x2
Receiver: Tenor Te7022
DAC:
Async: No
Working with Volumio: Yes
Tested Versions and Platforms: Raspberry pi 3, Volumio 2.8
Harware Mixer on Volumio: No
HW Mixer string:
Comments: Plug and play
Buying Link:

Name: TeraDak V4.5 Chameleon
Receiver: Tenor TE7022L
DAC: TDA1543 (16x in parallel)
Async: no
Working with Volumio: yes
Tested Versions and Platforms: all
Hardware Mixer on Volumio: no
Comments: also TeraDak V2.6 and V4.1

Name: Edifier S880DB
Receiver: Active speaker with USB DAC
DAC: XMOS U11690C20 (xCore 200 XU216)
Async: Capable of Async Playback YES
Working with Volumio: YES
Tested Versions and Platforms: Working on PI
Harware Mixer on Volumio: YES
HW Mixer string: -
Comments: Plug and play. Hi-Res audio certified, direct play up to 192KHz 24bit. Works well with Spotify connect (even remote control’s next/previous button works!).
Buying Link: various stores

1 Like

Name: Cambridge Audio DacMagic Plus
Receiver: ?
DAC: 2x Wolfson WM8740
Async: Yes
Working with Volumio: Yes
Tested Versions and Platforms: Raspberry Pi 2 B, Volumio 2.853
Hardware Mixer on Volumio: No
HW Mixer string:
Comments: Can enable hardware mixer, but can’t adjust volume
Buying Link:

Name: Schiit Modi 3+
Receiver: (Amp?) Dayton APA150
DAC:
Async:
Working with Volumio: YES
Tested Versions and Platforms: RPI 4
Harware Mixer on Volumio: Not that I’ve seen?
HW Mixer string:
Comments: No issues so far. Popped right up in the sources list
Buying Link: https://www.schiit.com/products/modi-1

Name: Hi-Fi-Pi#2
Receiver: I2S
DAC:PCM5242 x2
Async: slave mode
Working with Volumio: Yes
Tested Versions and Platforms:all RasPi
Harware Mixer on Volumio: Yes
HW Mixer string:
Comments: four channels, subwoofer
Buying Link https://www.chipdip.ru/product0/9000711852

Name: Fiio M6
Receiver: Exynos
DAC: Sabre ES9018Q2C
Async: ?
Working with Volumio: YES
Tested Versions and Platforms: x86/2.861
Harware Mixer on Volumio: NO
HW Mixer string: -
Comments: In “DSD direct mode” converts to PCM192/24.
Buying Link: -

Name: WaveIO + DDDAC1543 + Raspberry Pi 4 4GB streamer
Receiver: WaveIO
DAC: DDAC1543 / (8x) TDA1543
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: Raspberry Pi 4
Harware Mixer on Volumio: YES
HW Mixer string: Look for hw mixer name on /etc/mpd.conf . Report this ONLY if you had to make manual adjustment to make it work.
Comments: USB Receiver defaults to 44.1kHz, though the player reports varied and specific data on the stream. Support for specific controls over sampling etc. on the USB receiver end would be greatly appreciated, especially as it comes to Tidal/MQA.
Buying Link: Home (USB receiver. DDDAC is no longer available in the version I have it (1543).

Name: OPPO UDP-205
Receiver:
DAC: ESS SABRE 9038PRO
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: Windows 10 RPI
Harware Mixer on Volumio: YES
HW Mixer string:
Comments:
Buying Link: Discontinued

Name: ifi ZEN DAC
Receiver:
DAC: DS1793 Burr-Brown
Async: yes
Working with Volumio: yes
Tested Versions and Platforms:Volumio 2.861 on Pi3B
Harware Mixer on Volumio:no
HW Mixer string:
Comments:
Buying Link:

1 Like

Name: T+A HA 200 (DAC+Headphone Amplifier)
Receiver: Proprietary T+A (based on STM32H743)
DAC: PCM:4xPCM1795, DSD: proprietary T+A “True 1-Bit DAC”
Async: Yes
Working with Volumio: Yes
Tested Versions and Platforms: PI
Harware Mixer on Volumio: No
HW Mixer string:
Comments: Tested up tp PCM768 and DSD512. DSD1024 might work, but could not be tested (due to lack of DSD1024 test file).
Buying Link: Headphone Amplifier

Name:Edifier A300 Pro
Receiver: built-in USB port
DAC: TLV320AIC3268
Async:
Working with Volumio: YES
Tested Versions and Platforms: 2020Jan image on Rpi4B
Harware Mixer on Volumio:
HW Mixer string:
Comments:
Buying Link: Airpulse A300PRO - Edifier USA

Name: Loxjie D30
Receiver: USB Receiver
DAC: AK4493
Async: Capable of Async Playback (YES\NO)
Working with Volumio: YES
Tested Versions and Platforms: Working on PI or other platforms, with version name (most of times will be ALL or NONE): Rapsi 4 tested OK - Volumio 2.861
Harware Mixer on Volumio: YES
HW Mixer string: Look for hw mixer name on /etc/mpd.conf . Report this ONLY if you had to make manual adjustment to make it work.
Comments: Worked out of the box
Buying Link:

1 Like

Name: SMSL M200
Receiver: XMOS XU208
DAC: AKM AK4497EQ
Async: YES
Working with Volumio: YES
Tested Versions and Platforms: 2.861 on PC(Asrock-J4105-itx)
Harware Mixer on Volumio: YES
HW Mixer string: N/A
Comments: The M200 works with volumio only in PCM mode. When Direct_DSD is enabled, the DSF file is converted on the fly to PCM176 or PCM705.
Buying Link: S.M.S.L Audio Official -双木三林官网

1 Like

Name: Matrix Audio Element H -> Minidsp SHD Studio -> Hegel H390
Amp: Hegel H390
DAC: Hegel H390
Async: Yes
Working with Volumio: YES
Tested Versions and Platforms: x86 - Volumio 2.873
Hardware Mixer on Volumio: n/a
HW Mixer string: N/A
Comments: The x86 player uses the Element H USB interface card, which is connected to the Minidsp SHD, which in term is connected to the DAC of the Hegel H390.
Info Link: