Name: Denon DA-300USB Receiver: TMS320C674 DAC: PCM1795 Async: Capable of Async Playback (YES) Working with Volumio: (YES) Tested Versions and Platforms: Raspberry Pi B, Volumio 1.51 Harware Mixer on Volumio: (NO) HW Mixer string: / Comments: the display will show which input is selected, what content type (PCM or DSD) is played, the sample frequency and the headphone amp gain
Buying Link: /
Name: Topping TP30 MARK2 MK II Receiver: TA2024 T-Amp, OPA2134 op amp hi-fi special DAC: integrated Async: ? (I don’t think so regarding price) Working with Volumio: YES Tested Versions and Platforms: Raspberry Pi B, Volumio 1.51
Edit :
Tested succesfully with Pi B+, also with on/off resiliancy.
Harware Mixer on Volumio: ? HW Mixer string: ? Comments: Software Volume function working. No USB hotplug.
Able to handle TP30 poweroff/poweron cycle during playing! This will save on energy.
I shut off the power of the TP30 when playing music, waited several minutes and put power on back… and the music came back!
The Pi will be always ON, and the TP30 will be put on only when used.
I don’t really understand how it works as cutting off powersource is close to usb disconnexion to me. Facts prooves I’m wrong.
Name: Matrix New Mini-i Pro Receiver: XMOS Asynchronous USB 2.0 DAC: ESS SABRE 9016 Async: Yes…? Working with Volumio: Yes Tested Versions and Platforms: Rasberry Pi B+ and Volumio 1.51 Harware Mixer on Volumio: Yes HW Mixer string: Comments: Buying Link:store.matrix-digi.com/index.php? … duct_id=50
Name: FiiO X3 (DAP + DAC combo) Receiver: ?? DAC: Wolfson WM8740 Async: YES Working with Volumio: YES Tested Versions and Platforms: Volumio 1.5 on CuBox-i2eX Hardware Mixer on Volumio: N/A HW Mixer string: N/A Comments: FiiO X3 with firmware version 3.2, supports 32kHz/16-bit to 192kHz/24-bit, can pass signal through to coaxial S/PDIF (bypassing WM8740 if needed) Buying Link:amazon.com
Name: Devialet 200 Receiver: NA DAC: NA Async: Yes Working with Volumio: Yes Tested Versions and Platforms: Beagleboard Black Harware Mixer on Volumio: DIsabled HW Mixer string:NA Comments: Devialet has to be turned on first, selected to USB prior to turning on the BeagleBoard/Volumio. Otherwise will not work. When reset, or when D200 is turned off, and turned on again, Volumio will not work and needs to be rebooted. Should be same issues as hotplugging. Buying Link:http://www.devialet.com
Name: Primare DAC 30 Receiver: DAC: Crystal DSD DAC CS4398 Async: YES Working with Volumio: YES Tested Versions and Platforms: Volumio 1.5 on Raspberry B Hardware Mixer on Volumio: N/A
HW Mixer string: N/A Comments: supports 32kHz/16-bit to 192kHz/24-bit, can pass signal through to coaxial S/PDIF Buying Link:primare.net/product.asp?ProductID=56
Name: Meridian Explorer 2 Receiver: Dual Tile XMOS DSP with 16 cores and 1000 MIPS DAC: Texas Instruments PCM 5102 (ex Burr-Brown) Async: Yes Working with Volumio: Yes Tested Versions and Platforms: Volumio 1.5 / Rapsberry B+ with DIY linear & regulated PSU Hardware Mixer on Volumio: Yes HW Mixer string: - Comments: Doesn’t work with my cheap 2A switched PSU, work with my DIY PSU but I have some scratchs. Buying Link: -
Name:U-Sabre USB DAC 24Bit/96Khz SA9023/ES9023 V2.1 Receiver: ? DAC: Sabre ES9023 Async: YES Working with Volumio: YES Tested Versions and Platforms: Volumio 1.5 / Rapsberry B Harware Mixer on Volumio:YES HW Mixer string: Comments: Need a small USB cable between the DAC and the Raspberry Buying Link:audiophonics.fr/en/appareils … -5807.html
Name: HRT Music Streamer II+ Receiver: DAC: Async: Yes Working with Volumio: Yes Tested Versions and Platforms: Raspberry Pi B+, Volumio 1.55 Harware Mixer on Volumio: No HW Mixer string: Comments: Sounds awesome! Buying Link:amzn.com/B0038O38S6
Name: PS Audio Digital Link III Receiver: Cirrus Logic CS8416 DAC: Burr-Brown/TI SRC4192 Async: Capable of Async Playback YES Working with Volumio: YES Tested Versions and Platforms: Working on original PI, with version name Volumio 1.55 Comments: out of production PS Audio unit Buying Link: - ebay etc ~ $300-500
Name: Audio-GD NFB 11.32 Receiver: ? DAC: Sabre ES9018 Async: YES Working with Volumio: YES Tested Versions and Platforms: R-Pi B - Volumio 1.55, RuneAudio 0.3Beta Harware Mixer on Volumio: NO HW Mixer string: n/a Comments: in order to get this USB DAC working with Volumio you need to add “dwc_otg.fiq_fsm_mask=0x2”* to /boot/cmdline.txt
*: Options 0x1, 0x2 and 0x3 apply. My best result came from 0x2. Buying Link:http://www.audio-gd.com/Pro/Headphoneamp/NFB112014/NFB112014EN.htm
Name: Chord Hugo Receiver: ? DAC: Spartan 6 FPGA Async: YES Working with Volumio: YES Tested Versions and Platforms: Volumio 1.55, Raspberry Pi A and Raspberry Pi 2 Harware Mixer on Volumio: NO Comments: Raspberry Pi + Hugo = Better than a lot of systems that are much more expensive Buying Link:http://www.chordelectronics.co.uk/products-info.asp?id=92
Name: Chord 2Qute Receiver: ? DAC: Spartan 6 FPGA Async: YES Working with Volumio: YES Tested Versions and Platforms: Volumio 1.55, Raspberry Pi A and Raspberry Pi 2 Harware Mixer on Volumio: NO Comments: Raspberry Pi + 2Qute = Better than a lot of systems that are much more expensive (cheaper and slightly better than Hugo configuration) Buying Link:http://www.chordelectronics.co.uk/products-info.asp?id=97
Name: Schiit Bifrost Uber / USB Gen 2 Receiver: C-Media CM6631A DAC: AKM4399 Async: YES Working with Volumio: YES Tested Versions and Platforms: Volumio 1.55, CuboxI-4 Harware Mixer on Volumio: NO (AFAIK Schiit DACs do not provide hardware volume control; that happens in their amplifiers) Comments: Originally configured with Voyage Linux. I like the Volumio UI! Well done Buying Link:schiit.com/products/bifrost
Name: DENON PMA-50 USB-DAC Receiver: PMA-50 DAC: Built-in receiver Async: ? Working with Volumio: Yes Tested Versions and Platforms: Volumio 1.55/Raspberry pi B Harware Mixer on Volumio: No HW Mixer string: ? Comments: Buying Link: