Hi all,
I installed the latest version of volumio (1.51) on a RPI B+ with an ES9023 board:
[audiophonics.fr/audiophonics ... -8396.html](http://www.audiophonics.fr/audiophonics-dac-sabre-es9023-i2s-vers-analogique-24bit192khz-p-8396.html)
Wiring according to :
[tjaekel.com/T-DAC/files/RPi- ... deline.pdf](http://www.tjaekel.com/T-DAC/files/RPi-Bplus_guideline.pdf)
Selected Generic I2S driver but NOTHING happens, no audio out. Also when trying to play a file, the circle on the playback screen isn’t updated while playing.
I Also red something about a patch but cannot find the details and if it is needed for V1.51, any idea’s of what could be wrong in my setup?
Tried all mixer settings, and a lot of other things but no luck …
Using the ‘normal’ 3.5 mm audio out, all works ok!
-ben
Hi Ben,
I’ve had this combination working.
Wiring as follows :-
Didn’t connect MCLK
Select HiFiBerry i2s driver - it seems to work with the ES9023.
Kevin
volumio
November 11, 2014, 11:52pm
3
bennybubble:
Hi all,
I installed the latest version of volumio (1.51) on a RPI B+ with an ES9023 board:
[audiophonics.fr/audiophonics ... -8396.html](http://www.audiophonics.fr/audiophonics-dac-sabre-es9023-i2s-vers-analogique-24bit192khz-p-8396.html)
Wiring according to :
[tjaekel.com/T-DAC/files/RPi- ... deline.pdf](http://www.tjaekel.com/T-DAC/files/RPi-Bplus_guideline.pdf)
Selected Generic I2S driver but NOTHING happens, no audio out. Also when trying to play a file, the circle on the playback screen isn’t updated while playing.
I Also red something about a patch but cannot find the details and if it is needed for V1.51, any idea’s of what could be wrong in my setup?
Tried all mixer settings, and a lot of other things but no luck …
Using the ‘normal’ 3.5 mm audio out, all works ok!
-ben
Just to check. Did you reboot? Try to wait 20 seconds after the webui appears before applying the i2s profile.
Selecting the HIFIBerry worked for me, tnx !