Raspberry Pi 4 Computer Model B 4GB RAM & Volumio


Any News about Volumio with new Raspberry Pi 4 Computer Model B 4GB RAM ?
work it well ?

this is the new features

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.

This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair ofmicro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on).

The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.

The Specifications
Processor Broadcom BCM2711, quad-core Arm Cortex-A72 (Armv8) 64-bit SoC @ 1.5GHz
Memory 1GB, 2GB or 4GB LPDDR4
Connectivity 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
Gigabit Ethernet
2 × USB 3.0 ports
2 × USB 2.0 ports.
GPIO Standard 40-pin GPIO header
(fully backwards-compatible with previous boards)
Video & sound 2 × micro HDMI ports (up to 4Kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
Multimedia and graphics H.265 (4Kp60 decode)
H.264 (1080p60 decode, 1080p30 encode)
OpenGL ES 3.0-capable builtin GPU (Videocore VI 3D engine)



Even volumio staff doesn’t care? :frowning:

READ the forums, you’re only about the 100th thread started asking about Volumio and the Pi4

Give Michelangelo time for goodness sake, the Pi4 only appeared this week much to everyone surprise.

try you to find a post about RPI4 before Mon Jun 24 2019 08:18 …

is just a question to know how many time Michelangelo need to release a new Version of Volumio …

Tried pi 4 4GB with latest volumio pi image, does not finish booting sequence.

Pi 4 it self can boot normally with official debian buster.

We just released an experimental build, please provide feedback:


:smiley: So far so good. It works ok with an audioquest dragonfly red . Radio 80.80s app works fine. But I can’t login to Spotify, I put my password in and when I click on save and nothing happens ( no confirmation), and no surprise it gets hot but I think that’s something raspberry pi have to try and fix. I hope That helps you a bit.

RPi 4 and OSA DACBerry One running Volumio 1.026.

Running smoothly.
RPi 4 gets VERY hot very quickly, so adding riser header and big heatsink…

I have tried this release on a Raspberry Pi 4 4GB. I am not doing anything fancy just streaming music off a nas, to a Music Fidelity V-Link 192. All is going very well, loving the true gigabit Ethernet to transfer files! I will test the 1 gb PI 4 tomorrow.




RPi4 + Gigaport HD+ DAC does not work for me. I get an alsa error (attached), anything that can be fixed?
RPi4+Gigaport HD+.png

ASUS Tinker board S + Gigaport HD+ works fine.


The wifi on pi4 was error. And it’s very hot. This is my pi4

Hello, I am going to buy a new PI for a Volumio unit to setup, do you think the old good PI 3+ (or even B) is enaugh ? Or you suggest the new 4 ? I think the 3 is cheaper and less hot …

Works fine RPI4+AlloKali+AlloPiano2.1

Rpi 4 with 2gb ram or 4