Rasp pi 3 won't boot volumio 2...

HI everyone.

I’m having trouble getting my pi 3 to boot Volumio 2.

I’m using a Mac, I’ve downloaded the latest volumio version volumio-0.861-2016-03-25-pi.img

Next I used disk utility on my mac to write this to the micro sd card .

When I try to boot the pi, it stops at various points depending if I have a usb hard drive etc attached. But it seems to be stopped booting by this line

“sh: can’t access tty; job control turned off”

Any help would be appreciated, not great with computers…

Correct me if I got it wrong, but it will boot correctly if you remove the other usb devices?
And a few lines above the last message, you see something like ‘BusyBox v1.22…’?

Hi thanks for the reply.

It won’t boot with even with no usb devices/drives connected.

The last few lines are

PANIC: Attempted to kill init! exitcode=0x00000100

Entering kdb (current=0xbbd00000, pid 1) on processor 0 due to keyboard Entry
(0)kbd> _

I don’t even have a keyboard connected?

The same pi and micro sd card will successfully load up the latest version of OSMC.

Same problems on Rpi 2 with touch LCD

"PANIC: Attempted to kill init! exitcode=0x00000100
Entering kdb (current=0xbbd00000, pid 1) on processor 0 due to keyboard Entry
(0)kbd> _