[PLUGIN] Touch Display

Plugins
465

Did you add an overlay to the userconfig.txt?
sudo nano /boot/userconfig.txt
then add this line to the bottom
dtoverlay=piscreen,speed=16000000,rotate=90
give Ctrl+X then save and exit.

Give the command:
sudo reboot

466

No, I didn’t do anything through ssh at all. What commands do I need to give from start to finish? Thanks for the answer. I am very bad at this topic.

467

https://volumio.github.io/docs/User_Manual/SSH.html

468

I’ve done everything. Screen is black after reboot.

469

let’s wait for @gvolt comes online, he’s the master on this.

470

Thank you. I’m trying now 3.5 inch GPIO display - Black Screen - #4 by gvolt ,but no result.

471

Thank you. Everything worked according to the instructions.

472

So it’s solved now?

473

Yes!

474

Hello again. The problem was solved yesterday, but not completely: the screen does not respond to clicks, in any way. Tell me, what could be?

475

Touch part is not yet installed :stuck_out_tongue: and / or configured :wink: @gvolt could you…
In the touch display plugin you can enable a pointer,
then you could see if there is a responce when you press on the screen.

476

turned on, zero reaction

477

Do you have a link to the seller of your screen brand ?
Then we could find the info of the board and look what for the parts
You need for the install of the touch.

478

No, he had been lying idle for a long time…

479

3.5 has multiple versions of it is there any info on the board ?

480

image
image720×1280 74.5 KB

481

Oke it looks like a
MPI3501

http://www.lcdwiki.com/3.5inch_RPi_Display#Download_Resources

482

Following this should help.

If you should currently use “dtoverlay=piscreen” remove that.

483

How to do it? Where to look?

484