Claus65
January 28, 2017, 10:06pm
1
Hello Volumio-friends,
here is my Volumio-Project…
I have implemented all Volumio-plugins (GPIO, Spotify, Touchscreen)
Only a “Multiroom”-function is still missing
Raspberry Pi 3
Class-D-Amplifer TDA 8920
Symmetrical power supply 2 x 25V/ 230 VA
Volumio Release 2.041
1 Like
chsims1
January 28, 2017, 10:16pm
3
Looks smart. I really like the case
tux35
January 31, 2017, 7:25pm
4
Hi,
Great job !
Could you please add more information about DIY kit used (alim, soft power,class d, relay for pre-amp…) ?
Did you also homemade the speakers ?
Thanks in advance
1 Like
Hi,
my English is very bad, but I try …
Soft-start I haven’t build in, only the Loudspeaker-Protection behind the amplifer I have implemented. I have bought following moduls/parts here:
https://www.amazon.de/gp/product/B01L93TDFO/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B01KPQTW34/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
I haven’t build in a Pre-Amp. The Line-In I have controlled with 12Volt Relais, but I will change them in following modul:
https://www.amazon.de/gp/product/B01INDTNKI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
The Loudspeakers are selfmade. The Chassis are from Dayton:
https://www.intertechnik.de/Shop/Lautsprecher-Bausaetze/Bausaetze-mit-Dayton/_BSNeedleRS100_1768,de,6409,53223
bzw. Oaudio:
http://www.oaudio.de/Lautsprecher-Selbstbau/Bausaetze/Subwooferbausaetze/Portokasse-8-Subwoofer-Bausatz.html
At this time I build also new 2-way-systems with SB Acoustics Chassis:
https://www.intertechnik.de/Shop/Lautsprecher-Bausaetze/Bausaetze-mit-SB-Acoustics/_BSSB18_1768,de,6706,53260
The casing I have a little bit redesigned:
1 Like
Fantástic! You can upload a block diagram and genéric wired forma this?
Regards
vikozo
February 16, 2017, 7:26am
8
hello
looks nice,
is it possible to use the touchscreen?
I am asking because you have also the button with next start stop
do you have a picture on your frontpanel?
have a nice day
vinc
Hi, these are the power supplies you use for the Raspberry Pi and the lcd panel?
ebay.com/itm/AC-110V-220V-TO … q5l5lWNUMg
Regards
Claus65
February 21, 2017, 7:31pm
10
Hi,
look here:
amazon.de/Schaltnetzteil-LE … ll+rs-15-5
MeanWell, RS-15-5
@vinc
I can use the Touchscreen and I can use the button.
The buttons are more comfortable
@danielfelix
I can create a block diagram, but it takes a few days.
Regards
Claus
Thank you! I wait for the diagram, there is no rush.
Regards
Claus65
February 24, 2017, 3:36pm
12
Hi daniel,
here is the block-diagram…
Thanks Claus65, You have been very kind, will guide me to build my own project.
Best regards.
Daniel
WOW,
great project an very nice woodworking.
make a bow
H. Steam
Servus Claus,
kannst du mich bitte mal kontaktieren?
How did you implement the switches for Play, Stop etc?
Hello Claus65,
Great job ! Looks beatyful.
Can you give me link to lcd that You used ?
Thank you.
Helir
July 24, 2021, 6:50pm
19
God, this case looks so cool. The wood texture is great, it looks quite minimalistic. I saw something similar on YouTube, only there a guy made a case for his pc, I got interested in that idea and decided to do it. After buying the boards, it turned out that they were uneven, and the case would be bad. I could not do without a planer, so I had to splurge on the best benchtop jointer(<spam link removed> ). I ended up with a good case, one side I left glass so that the RGB illumination could be seen. And by the way, contrary to my expectations, the components do not heat up at all.
1 Like