Hifiberry dac2 HD 5V Stromversorgung vom Radio trennen

Hallo Leute. Ich lese hier schon lange mit, und habe sehr viel gelernt, und meistens Antworten auf meine Fragen gefunden. Leider nicht für mein Anliegen.

Ich möchte an meinem Hifiberry HD den Analogteil 5V getrennt vom Raspberry mit Strom versorgen.
Beim hifiberry pro muss Mann dafür anscheinend den R14 entfernen.
Aber wie kann ich das beim HD Board erreichen.
5V an J1 ist klar. Und wie entferne ich die 5V vom Raspi ? Pin abknipsen?
Freue mich auf Antwort. LG.

For the non German natives:

Hello folks. I’ve been reading here for a long time and have learned a lot, and mostly found answers to my questions. Unfortunately not for my request.

On my Hifiberry HD, I would like to supply the 5V analog part with power separately from the Raspberry.
With the hifiberry pro you apparently have to remove the R14 for this.
But how can I achieve that with the HD board.
5V at J1 is clear. And how do I remove the 5V from the Raspi ? pin off?
I’m looking forward to an answer. LG.

Hi,

I think you should drop this question at Hifiberry. They have better knowledge on their hardware to support you.

1 Like

Danke