Clicks and Pops after Volumio Update

I recently updated Volumio to version 2.861 and this has caused clicks and pops to appear when playing files from my NAS. This does not happen when playing files from a USB drive or when streaming TIDAL.

The system includes a Allo USBridge Signature feeding a RME ADI-2 FS DAC vis USB. The NAS is a QNAP TS-231K 2 bay with two Seagate IronWolf 4TB drives configured in a RAID1.

This issue was not present prior to updating Volumio.

I found the information below in an older post and have tried it but it did not fix the problem.

Pops and crackle in the sound can often be fixed by adding dwc_otg.fiq_split_enable=0 to /boot/cmdline.txt. Just add it to the line that doesn’t start with a # and reboot. Verify that the parameter took effect by looking for “dwc_otg: FIQ split fix disabled” in the kernel boot log.

Thanks for any assistance.

UPDATE: I downgraded to version 2.799 and the problem is fixed.